National Skirting White Regency Primed Skirting Board - White - Regency

The board is constructed from moisture-resistant MDF, which helps protect it from humidity and minor splashes. However, it is not fully waterproof and should not be exposed to prolonged direct water contact.

Yes, the board comes with a white primed finish, making it ready for you to apply your desired paint color or gloss.

You will typically need a measuring tape, pencil, fine-toothed saw, adhesive, hammer or nail gun, or screws and a drill. Filler and sandpaper are also required for finishing.

Gently wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaning materials.

This is the Regency profile, known for its classic and elegant design.

Each board measures 18mm in thickness, 140mm in height, and 4200mm (4.2 meters) in length.

Due to its moisture-resistant properties, it can be used in bathrooms with good ventilation. However, direct water exposure should be avoided, and ensure proper sealing after painting.

Ensure the wall surface is flat and the floor is level. Check for any debris causing a gap. Adjust fixings or use a suitable filler for minor imperfections.

Ensure the primed surface was smooth and dust-free before painting. Apply thin, even coats of paint rather than one thick coat. Sand lightly between coats if necessary.

This indicates excessive moisture. Ensure the area is well-ventilated and that no liquid has been spilled directly onto the boards. Check for leaks behind the wall.