AC Infinity Noise Reduction Clamp - 8 Inch
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This AC Infinity Noise Reduction Clamp is designed for growers and HVAC professionals who need to securely connect ducted components while minimizing noise and preventing air leaks. Its key benefit is creating an airtight seal that also absorbs vibrations, leading to a quieter operation. A potential caveat is that it's specifically sized for 8-inch ducts, limiting its universal application. The clamp features a heavy-duty rubber construction for flexibility and durability, adjustable stainless steel hose clamps for a secure hold, and is ideal for connecting inline fans, carbon filters, and ducting.
All features
| Model Part Number | AC-NRC200 |
|---|---|
| Brand | AC Infinity |
Extended Product Information
FAQs
What is the primary purpose of this clamp?
The primary purpose is to securely connect two 8-inch ducted components together while minimizing noise transmission and preventing air leaks.
Can this clamp be used with different sizes of ducting?
No, this clamp is specifically designed for 8-inch diameter ducting and components.
How do the hose clamps work?
The stainless steel hose clamps have a worm drive mechanism that allows you to tighten them around the rubber coupling using a screwdriver. This tightens the clamp, creating an airtight seal and holding the components securely together.
Will this clamp completely eliminate fan noise?
It is designed to significantly reduce noise by absorbing vibrations and muffling airflow sounds. Complete elimination of all noise may depend on the fan's inherent noise level and other system factors.
Is the rubber material resistant to heat?
The rubber is heavy-duty and designed for HVAC and grow environments, which can involve moderate heat. However, prolonged exposure to extreme temperatures may affect its longevity.
How often should I check the tightness of the clamps?
It is recommended to check the clamp tightness periodically, especially after initial installation, and after any significant changes in temperature or humidity, to ensure the seal remains effective.
Can I use this clamp outdoors?
While durable, the rubber material may degrade over extended periods with direct UV exposure. For outdoor applications, ensure it is protected from direct sunlight.
Troubleshooting
Air leak detected after installation
Ensure the 8-inch ducting and the clamp are correctly aligned. Re-tighten the stainless steel hose clamps, ensuring they are evenly distributed around the connection and pressing firmly against the duct ports. Check that the rubber coupling is fully seated on both components.
Clamp does not fit snugly
Verify that both components being connected are indeed 8-inch diameter and have compatible port sizes. Ensure no obstructions are preventing the clamp from fully encompassing the duct ports.
Excessive noise is still present
Confirm that the clamp is positioned correctly between the source of vibration (e.g., fan) and the ductwork. Ensure the hose clamps are sufficiently tightened to create the airtight seal, as air escaping can create noise. Check if the noise originates from elsewhere in the system.
Pros and Cons
Pros
- Effectively reduces noise from fan vibrations and airflow.
- Creates a secure and airtight seal to prevent leaks.
- Durable and flexible rubber material ensures longevity.
- Easy to install and adjust with included hose clamps.
- Protects against corrosion with stainless steel clamps.
Cons
- Specific 8-inch sizing limits compatibility with other duct sizes.
- Requires proper tightening of hose clamps to ensure an effective seal.
- Rubber may degrade over extended periods in extreme UV or chemical exposure.
Setup, Compatibility & Care
Setup:
- Ensure both duct ports or piping ends are clean and free of debris.
- Slide one end of the rubber coupling over one of the 8-inch duct ports or pipes.
- Slide the other end of the rubber coupling over the second 8-inch duct port or pipe, ensuring a snug fit.
- Position the stainless steel hose clamp over the rubber coupling where it meets the duct/pipe.
- Use a screwdriver to tighten the worm drive lock on the hose clamp until a secure, airtight seal is achieved. Avoid overtightening.
Compatibility:
- Designed specifically for 8-inch diameter ducting, inline fans, and carbon filters.
- Compatible with both rigid and flexible ducting materials that have standard 8-inch ports.
Care:
- Clean the rubber coupling with a damp cloth as needed. Mild soap can be used for tougher grime, but rinse thoroughly.
- Periodically check the hose clamps for tightness, especially after initial installation or significant temperature fluctuations.
- Inspect the rubber for any signs of wear or damage; replace if compromised to maintain an effective seal.