Best current price£82.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£82.00Visit shop Flat Glazing Liteglaze High Gloss Clear Acrylic Sheet 1800 X 1200 X 2Mm
Visit shop3 offers from £82.00
View price history by clicking the chart icon.
This 2mm Liteglaze Acrylic Sheet from Flat Glazing is designed for DIY enthusiasts and builders needing a versatile, clear glazing solution. Its key benefit is the combination of high gloss, optical clarity, and excellent weatherability for both interior and exterior applications. A potential caveat is its 2mm thickness, which may not be suitable for applications requiring high structural rigidity.
| Model Part Number | Liteglaze |
|---|---|
| Brand | Flat Glazing |
Yes, the Liteglaze Acrylic Sheet has excellent weatherability and is designed for both interior and exterior applications.
Yes, you can drill holes. Use a sharp drill bit designed for plastics and drill at a slow speed. Avoid excessive pressure to prevent cracking.
It is lighter, more impact-resistant, and safer than glass, but can scratch more easily. It offers good optical clarity and can provide insulation benefits.
Use a soft, damp cloth with a mild, non-abrasive detergent. Avoid harsh chemicals and abrasive materials.
While it has good optical clarity, this specific product is not rated for direct food contact. Consult product specifications for food-grade materials if required.
Extruded acrylic, like Liteglaze, is made through an extrusion process that results in more consistent thickness and better surface finish. Cast acrylic is made by pouring acrylic into a mold and can be more impact-resistant and easier to laser cut.
Inspect the protective film on both sides. Scratches are often on the film itself, not the acrylic. If the acrylic is scratched, try using a plastic polish specifically designed for acrylic sheets.
Ensure you are using a sharp, fine-tooth blade suitable for plastics. For scoring, use a sharp utility knife and apply consistent pressure. Consider practicing on a scrap piece first.
This is normal for acrylic under direct, prolonged sunlight and heat. Ensure adequate ventilation and consider using thicker acrylic if warping is a significant concern for the application. For secondary glazing, ensure there is an air gap.
Ensure both surfaces are clean and dry. Use an adhesive specifically recommended for acrylic or extruded plastics. Test the adhesive on a scrap piece first.
Setup:
This acrylic sheet can be easily cut to size using appropriate tools like a fine-tooth saw or scoring knife for thinner sections. Ensure you wear safety glasses and gloves during cutting. For installation, consider using appropriate fixings such as silicone sealants, clips, or frames designed for acrylic sheeting. Avoid over-tightening fasteners, which can cause stress cracks.
Compatibility:
Liteglaze Acrylic Sheet is compatible with most common adhesives and sealants suitable for plastics. Test any adhesive on a small, inconspicuous area first. It is suitable for both interior and exterior use, performing well across a range of temperatures.
Care:
Clean the surface using a soft, damp cloth and a mild, non-abrasive detergent. Avoid using ammonia-based cleaners, solvents, or abrasive pads, as these can damage the high-gloss finish and cause hazing. For stubborn marks, a specialized acrylic cleaner can be used. Always wipe in one direction to minimize static build-up and dust attraction.
