Best current price£124.02from B&Q
Shopping.co.uk recommended and popular offers
B&Q£124.02Visit shop B&Q - 4 Port Underfloor Heating Manifold With Pipe Connections Copper 15mm X 3/4 Ball Valves With Thermometers Psw Tradesuppliers Ltd
Visit shop14 offers from £124.02 - £125.00
View price history by clicking the chart icon.
The Wärmer System 4 Port Underfloor Heating Manifold is ideal for homeowners and installers looking to efficiently manage and control heating across multiple zones in residential or commercial properties. Its primary benefit is the precise, individual temperature control for each zone, leading to enhanced comfort and energy savings. A key consideration is the need for standard plumbing tools and basic knowledge for installation. This manifold features a pre-mounted bracket for quick assembly, integrated ball valves with thermometers, an automatic air vent, and a pressure gauge, simplifying system monitoring and maintenance.
| Model Part Number | 4 Port |
|---|---|
| Brand | Wärmer System |
This manifold features 3/4 inch threads and is designed to be compatible with any euro cones, making it suitable for various standard underfloor heating pipe sizes when the correct euro cone fitting is used.
While the manifold allows for individual zone control, you will need compatible thermostats or actuators connected to the manifold's control valves (if equipped) to achieve automated temperature regulation for each zone.
To drain the system, locate the filling/drain off valve on the manifold. Connect a hose to the valve outlet and slowly open it to allow the system fluid to drain. Ensure the main water supply is isolated before draining.
This manifold is specifically designed for hydronic (water-based) underfloor heating systems. Its suitability for cooling applications depends on the overall system design and component compatibility, but it is primarily intended for heating.
The thermometers display the temperature of the water flowing through each respective loop. This allows for quick visual checks to ensure the system is operating at the desired temperatures and that heat is being distributed evenly across zones.
It is recommended to check the system pressure regularly, especially after initial installation or any maintenance. A typical operating pressure for underfloor heating systems is between 1 and 2 bar. Consult your system's documentation for specific recommendations.
Yes, the manifold can be configured for left or right-hand supply, offering flexibility during installation to suit the layout of your heating system.
Check if the corresponding ball valve is fully open. Ensure there is no air trapped in the loop by checking the air vent and performing a system bleed if necessary. Verify that the flow meter (if applicable on the supply side) is adjusted correctly for that zone.
Check the pressure gauge. If low, use the filling/drain off valve to add more water to the system until the correct pressure is reached. Inspect for any leaks around connections.
This may indicate an air leak in the primary heating circuit or the underfloor heating pipework. Inspect all connections and pipework for potential ingress points. Ensure the primary system is properly de-aerated.
Ensure you are using the correct euro cone fittings compatible with the 3/4 inch manifold threads and your specific pipe diameter. Make sure the pipe end is clean and free of burrs.
Setup:
Compatibility:
Care:
