V-TUF Dust Extractor - Black/Yellow - MINi HSV

M-Class rating indicates that the extractor can filter 99.9% of dust with a maximum pass of 1% and is suitable for hazardous dusts, including silica. The H13 HEPA standard confirms this high level of filtration.

The frequency of filter cleaning depends on the type and amount of dust being extracted. Inspect the filter regularly and clean it when performance noticeably decreases or when it appears heavily soiled. Allow it to dry completely before reinstalling.

This model is designed for dry dust extraction. Using it for wet applications may damage the motor and filters and will void the warranty.

The V-TUF Mini M-Class dust extractor is available in choice of voltages, typically including 110V and 240V, to suit different site power requirements.

The monitor provides a visual indication that the airflow velocity is within the required range for compliant dust extraction. It ensures the machine is operating effectively to maintain health and safety standards.

The hose length is designed for practical use on job sites. Specific lengths may vary, but it is intended to connect to common power tools and reach a reasonable working area.

Check if the filter is clogged and needs cleaning or replacement. Ensure the tank is not full and all hose connections are secure and free of blockages.

Verify that the power cable is securely plugged into a working power outlet. Check the power switch on the unit.

Ensure the M-Class filter is correctly installed and undamaged. Check that the tank lid and all connections are sealed properly.

Ensure you are operating the shaker mechanism correctly by tapping or pulsing the designated lever. Check for any hardened debris that might be obstructing the filter.