Best current price£95.49from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£95.49Visit shop Festo Round Cylinder 40Mm Bore 25Mm Stroke Double Acting - 196030
Visit shop1 offer from £95.49
View price history by clicking the chart icon.
The Festo DSNU-40-25-PPV-A is a double-acting pneumatic round cylinder designed for industrial automation. It offers a 40 mm piston diameter and 25 mm stroke, providing a theoretical advance force of 752.9 N at 6 bar, making it suitable for a wide range of actuation tasks. Key features include adjustable pneumatic cushioning at both ends and self-adjusting end-position cushioning for smooth operation and extended component life. A potential caveat is the need for a compressed air supply and proper installation to achieve optimal performance.
| Model Part Number | DSNU-40-25-PPV-A |
|---|---|
| Brand | Festo |
Refer to the official Festo datasheet for the DSNU-40-25-PPV-A for precise specifications. Generally, roundline cylinders operate within standard industrial pneumatic pressure ranges, often up to 10 bar.
Locate the cushioning screws at each end of the cylinder. Turning them clockwise typically increases cushioning (slows down), while counter-clockwise decreases it (speeds up). Adjust incrementally and test to find the optimal setting for your application.
Yes, the cylinder will function mechanically without proximity switches. However, you will lose the ability to electronically sense its position, which is crucial for many automated control systems.
While the DSNU series is designed for operation without lubrication in many cases, consult the Festo documentation for your specific environment. If lubrication is used, ensure it is ISO VG 32 standard or equivalent pneumatic oil.
The theoretical advance force for the DSNU-40-25-PPV-A at 6 bar is approximately 752.9 N.
The self-adjusting cushioning adapts automatically. You should observe smooth deceleration at the end of the stroke regardless of minor changes in load or speed. If you experience jarring impacts, manual adjustment might be needed, or the operating parameters may be exceeding the system's design limits.
Check air supply pressure and connection. Verify valve operation and correct porting. Ensure no obstructions in the air lines or cylinder path.
Verify air pressure is sufficient. Check for air leaks along the cylinder body or connections. Clean or replace air filter if clogged.
Adjust the pneumatic cushioning at the affected end. Ensure the cylinder is properly mounted and aligned. Reduce operating speed if necessary.
Check for internal wear or damage. Ensure the magnetic piston is correctly positioned and proximity switches are functioning and properly adjusted.
Setup:
Compatibility:
Care:
