20mm Pipe Straight Joiner - ¾” BSPF Thread
Best current price£7.32from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.32Visit shop B&Q - 20mm Pipe Straight Joiner 3/4 Bspf Thread Water Connector For Irrigation System
Visit shopB&Q£7.32Visit shop One Offer
1 offer from £7.32
View price history by clicking the chart icon.
B&QB&Q - 20mm Pipe Straight Joiner 3/4 Bspf Thread Water Connector For Irrigation System
Free delivery in 1–3 days
£7.32
Visit shop
Product Information
Full details
This 20mm Pipe Straight Joiner with ¾” BSPF Thread is designed for homeowners and landscapers seeking a reliable way to extend or repair irrigation systems. Its key benefit is providing a secure, leak-free connection using durable, UV-stable plastic. A potential caveat is that it requires standard ¾” BSP fittings for the threaded end.
All features
| Brand | B2C |
|---|
Extended Product Information
FAQs
What type of pipe does this joiner connect to?
This joiner is specifically designed for 20mm standard irrigation pipes on the barbed end.
What does ¾” BSPF thread mean?
BSPF stands for British Standard Pipe Female thread. This means it is designed to connect to a ¾ inch BSP Male (straight) thread. It is a common thread size for plumbing and irrigation fittings.
Do I need any special tools to install this joiner?
No, installation is designed to be simple. The 20mm pipe connects via a push-fit barbed end, and the threaded end screws onto a compatible male fitting. No special tools are required for basic installation.
Can this joiner be used for drinking water systems?
This joiner is intended for irrigation systems. It is not certified for potable (drinking) water applications.
How can I ensure a leak-free connection?
Ensure the 20mm pipe is pushed fully onto the barbed end. For the threaded connection, ensure the male thread is clean and properly seated. Hand-tighten the threaded connection firmly, and if necessary, use a wrench for a slight additional turn, avoiding overtightening.
Is this joiner suitable for high-pressure water systems?
This joiner is designed for standard garden irrigation pressures. It is not intended for high-pressure industrial or high-volume mains water applications that exceed typical irrigation system limits.
How resistant is the plastic to sunlight?
The joiner is made from UV-stable plastic, which provides good resistance to degradation from sunlight, making it suitable for outdoor use. However, like all plastics, extreme and prolonged exposure can eventually cause wear.
Troubleshooting
Leak at the 20mm pipe connection
Ensure the pipe is pushed on fully and squarely. Check the pipe end for damage or burrs. If the pipe is old, it may have lost some flexibility; warming the pipe end slightly with warm water (not boiling) can help. Consider using a hose clamp for extra security if needed.
Leak at the ¾” BSPF threaded connection
Verify that the male thread is clean and undamaged. Ensure the threaded component is properly aligned and screwed on straight. Check the seal on the male threaded component (e.g., washer or O-ring) and replace if necessary.
Difficulty pushing 20mm pipe onto barbed end
Ensure the pipe end is cut cleanly and squarely. Warm the end of the pipe slightly with warm water to make it more pliable. Apply a small amount of water-based lubricant or silicone spray to the barbed end of the joiner.
Joiner cracks or degrades over time
Ensure the product is being used within its intended parameters. While UV-stable, extreme, prolonged exposure to harsh chemicals or physical stress can degrade plastic. Replace the joiner if visible signs of degradation occur.
Pros and Cons
Pros
- Constructed from UV-stable plastic for longevity outdoors.
- Barbed fitting ensures a strong, non-slip grip on 20mm pipes.
- Effortless push-fit installation requires no special tools.
- Standard ¾” BSPF thread offers broad compatibility with existing irrigation parts.
- Designed to create secure, leak-free connections.
Cons
- Only compatible with 20mm pipes on the barbed end.
- Requires a ¾” BSP male threaded fitting for connection.
- Not suitable for high-pressure applications beyond standard irrigation.
- Plastic construction may be less durable than metal in extreme conditions.
Setup, Compatibility & Care
Setup:
- Ensure the end of your 20mm irrigation pipe is clean and free of debris.
- Firmly push the 20mm pipe onto the barbed end of the joiner until it is fully seated. A secure fit is crucial for preventing leaks.
- For the threaded end, screw the ¾” BSPF thread onto a compatible ¾” BSP male threaded component (e.g., tap connector, valve). Hand-tighten securely, and if necessary, use a wrench for a final quarter-turn, being careful not to overtighten.
Compatibility:
- Pipe Size: Exclusively designed for 20mm standard irrigation pipes.
- Thread Size: Compatible with standard ¾” BSP (British Standard Pipe) male threads. This is a common size for garden taps, water filters, and many irrigation valves.
Care:
- Periodically inspect connections for any signs of wear or leakage.
- Clean the exterior with a damp cloth if it becomes dirty. Avoid using harsh solvents or abrasive cleaners.
- While UV-stable, prolonged extreme exposure can eventually impact material integrity. Ensure connections are not constantly under unnecessary physical stress.