Best current price£399.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£399.99Visit shop B&Q - Duc305 Twin 18V / 36V Lxt Cordless 30Cm Chainsaw 2 X 6.0Ah
Visit shop1 offer from £399.99
View price history by clicking the chart icon.
The Makita DUC305Z Twin 18v BL LXT Cordless Chainsaw is designed for users needing efficient and powerful cordless cutting for various tasks. Its key benefit is the 36v power delivered by two 18v batteries, offering strong performance without the hassle of cords or emissions. A caveat is that batteries and charger are sold separately for the base tool, though this specific package includes them.
| Model Part Number | DUC305Pg2 |
|---|---|
| Brand | Makita |
It uses two Makita 18v LXT Lithium-Ion batteries connected in series to provide 36v power.
Yes, this specific package (DUC305Pg2) includes 2 x 6.0Ah batteries and a dual port charger.
The chainsaw features captive nuts for easier adjustment. Loosen the bar nuts slightly, adjust the tension using the integrated tensioning screw, and then retighten the bar nuts.
The bar length is 300mm (approximately 12 inches).
It features an electric chain brake for quick stopping.
You should check the oil level before each use and refill as necessary. The tool also features an oil capacity display.
Yes, you can use any Makita 18v LXT battery, but battery life will vary depending on the Ah rating of the batteries used.
Ensure both batteries are correctly inserted, fully charged, and are compatible 18v LXT models. Check if the chain brake is engaged; disengage it before attempting to start. Verify the main power switch is on and not in the auto power-off state.
Check chain sharpness and sharpen if dull. Ensure the chain is properly tensioned and lubricated. Verify the oil reservoir is filled and the lubrication system is functioning. Clean any debris from the bar groove and oiler hole.
This could be due to an overload condition, insufficient battery power, or the kickback brake engaging. Allow the tool to cool, check battery levels, and ensure the cut is not too aggressive. If the kickback brake is activated, reset it according to the manual.
Ensure the chain is properly tensioned and sharp. Check for damage to the bar or chain. A dull or improperly tensioned chain can cause excessive vibration.
Setup:
Compatibility:
Care:
