Best current price£76.99from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£76.99Visit shop VEVOR PTO Shaft PTO Drive Shaft 1-3/8" x 6 Spline Ends Round End T4 43"-61"
Visit shop1 offer from £76.99
View price history by clicking the chart icon.
The VEVOR T4 Gelenkwelle is designed for agricultural professionals and hobby farmers who need a reliable power transfer solution for equipment like rotary tillers, mowers, and fertilizer spreaders. It offers robust torque handling and flexible reach with its telescopic design; however, users must verify that the shaft end profiles match their specific machinery requirements before installation.
| Model Part Number | T4-BⅢP*1100mm*4.05.05B*4.05.A35 |
|---|---|
| Brand | VEVOR |
It is designed with a standard 1-3/8 inch 6-spline connection, which is common for most tractors, but you should verify your specific PTO output specs before purchase.
It supports up to 35 HP at 540 RPM and 53 HP at 1000 RPM.
While the shaft is telescopic, permanent shortening is generally not recommended unless performed by a professional machinist to ensure proper overlap.
Grease all zerk fittings before every heavy use or at least every 8-10 hours of operation to ensure longevity.
The round implement end is designed for specific agricultural gearboxes; please check your equipment manual to ensure it is compatible with a round drive shaft connection.
Check if the shaft is properly aligned and that the locking collar is fully seated on the PTO stub.
Clean the inner and outer tubes of dirt or debris and re-apply fresh, high-quality chassis grease.
Ensure that the provided safety chains are properly anchored to the tractor frame or implement body.
To ensure safe and optimal operation, verify that the tractor PTO speed matches the chosen application settings. Always secure the anti-rotation chains to prevent the plastic guard from spinning. For maintenance, clean the sliding surfaces of the shaft regularly and apply high-quality lithium-based grease to the telescopic sections. Inspect the cross-joints and grease nipples before every use to maintain smooth articulation. If you are replacing an existing shaft, confirm that the required retracted and extended lengths fall within the 1100 mm to 1550 mm range to prevent equipment damage.
