Fiddes Premier Wood Varnish - 1 L - Satin

Name: Fiddes Premier Wood Varnish - 1 L - Satin
Brand: Fiddes
SKU: dyetq7xxlg
Availability: InStock

Fiddes Premier Wood Varnish is a premium water-based Polyurethane/Acrylic finish designed for the ...

Best current price£22.85from The Paint Shed

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

The Paint Shed£22.85Visit shop

Fiddes Clear Premier Wood Varnish Matt-1 L

Visit shop

All Offers

4 offers from £22.85 - £47.82

View price history by clicking the chart icon.

The Paint ShedFiddes Clear Premier Wood Varnish Matt-1 L

Free delivery in 1–3 days

£22.85

Visit shop

Product Information

Full details

Fiddes Premier Wood Varnish is designed for homeowners and DIY enthusiasts looking to protect and enhance indoor wood surfaces like floors, furniture, and worktops. This premium water-based blend provides a durable, non-yellowing finish that maintains the natural aesthetic of your wood, though users should note that application requires careful adherence to drying times and grain-direction techniques for the best results.

All features

Model Part Number	P1051S
Brand	Fiddes

Extended Product Information

FAQs

Is this varnish suitable for outdoor garden furniture?

No, Fiddes Premier Wood Varnish is specifically designed for internal use only.

Can I use this on top of existing oil-based finishes?

It is recommended to fully sand down any existing finishes to ensure proper adhesion of the water-based varnish.

How many coats should I apply?

Two coats are standard for most woods, but softwood may require a third coat for optimal protection.

What is the drying time between coats?

You should allow 2-3 hours for the product to dry between coats.

Do I need a primer before applying the varnish?

No, Fiddes Premier Wood Varnish is designed to be self-priming on properly prepared raw wood surfaces.

Troubleshooting

Visible brush marks or streaks

Apply thinner coats and ensure you are working along the wood grain rather than across it.

The finish looks cloudy

Ensure the surface was completely dry before application and check that the room humidity is not excessively high.

Surface feels sticky after 3 hours

The ambient temperature may be too low; allow for additional drying time and ensure the area is well-ventilated.

Pros and Cons

Pros

Dries quickly for efficient project completion
Non-yellowing formula preserves the natural wood look
Suitable for high-traffic areas like worktops and floors
Water-based for easier clean-up compared to solvent-based alternatives

Cons

Requires careful preparation of surfaces to ensure adhesion
Limited to internal use only
Requires precise timing between coats for a professional finish

Setup, Compatibility & Care

Before starting your project, ensure the target wood surface is clean, dry, and sanded smooth. If there are any cracks, holes, or imperfections, these must be filled with a suitable wood filler and sanded flush before the first coat. Stir the varnish thoroughly before use to ensure the leveling agents are evenly distributed. Use a high-quality synthetic bristle brush for the application. Always apply thin, even coats following the direction of the wood grain. For most surfaces, two coats are sufficient, though softwoods may require a third coat for complete saturation and protection. Clean tools immediately with water after application.