Abracs Spindle Mounted Wire Brush Set - WB161
Best current price£9.77from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.77Visit shop ABRACS Spindle Mounted Wire Brush/Wheel Set 0.3mm 4500RPM (3 Pieces) - WB161
Visit shopeBay£9.77Visit shop One Offer
1 offer from £9.77
View price history by clicking the chart icon.
eBayABRACS Spindle Mounted Wire Brush/Wheel Set 0.3mm 4500RPM (3 Pieces) - WB161
Free delivery in 1–3 days
£9.77
Visit shop
Product Information
Full details
The Abracs Spindle Mounted Wire Brush Set is an essential utility pack for metalworkers, restorers, and DIY enthusiasts who need to tackle surface preparation, rust removal, and material cleaning. Featuring a 50mm cup brush, 50mm wire wheel, and 25mm end brush, this set offers versatility for various shapes and tight spots; however, users must strictly adhere to the 4500 RPM speed limit to prevent wire breakage and maintain safe operation.
All features
| Model Part Number | WB161 |
|---|---|
| Brand | ABRACS |
Extended Product Information
FAQs
Can I use these on a standard high-speed angle grinder?
No, most angle grinders operate at 10,000+ RPM, which exceeds the 4500 RPM limit of these brushes and can cause them to break.
What is the benefit of the brass-dipped coating?
The coating provides superior resistance to corrosion and helps the wire withstand friction heat during long cleaning sessions.
Are these brushes suitable for wood?
While intended for metal, they can be used for wood texturing, though the aggressive wire may leave marks.
How do I know when to replace the brush?
Replace the brush when the wires have worn down to less than half their original length or if the density is insufficient to perform the task.
Can these be used for polishing?
They are ideal for mechanical polishing and surface preparation, but they will not provide a mirror-finish without a dedicated polishing compound.
Troubleshooting
Excessive wire shedding
Verify that your power tool speed is not exceeding the 4500 RPM maximum.
Brush vibrating during use
Check that the spindle is centered and fully tightened in the tool collet.
Poor material removal
Ensure you are using the correct brush geometry for the surface shape and not applying too much pressure.
Pros and Cons
Pros
- Durable brass-dipped wire resistant to rust
- Comprehensive set covers most surface prep scenarios
- Stable metal mounting reduces tool chatter
- Excellent for both heavy rust removal and light finishing
Cons
- Lower RPM limit of 4500 requires variable speed control
- Not suitable for high-speed angle grinders running at 10,000+ RPM
- Wire shedding can occur if pushed beyond rated speed
Setup, Compatibility & Care
To set up these brushes, simply insert the 6mm spindle into the collet of your drill or rotary tool and tighten it firmly. Always verify that your tool's speed is set to a maximum of 4500 RPM before engaging the brush with the material.
Compatibility note: While these can be used with various power tools, ensure your tool has a 6mm chuck or collet. For care, store the brushes in a dry environment to prevent premature corrosion of the brass-dipped coating. Inspect the wires before each use for signs of excessive wear or tangling. If a wire becomes bent or loose, use pliers to remove it before continuing.
Similar items
NGT VX2 Bite Alarm Set - 2 PieceFrom £19
Duracell Lithium Coin Cell Battery - CR2032 - GoldFrom £4
Opulent Oud Eau de Parfum - Lattafa - 100mlFrom £15
GP Lithium Coin Battery - CR2025 - 3VFrom £7
FURminator Undercoat deShedding Tool - Long Hair Dogs - MediumFrom £20
Duracell 2032 Electronics Batteries - GoldFrom £5
GP Coin Cell Batteries - Black - CR2032 (4 Pack)From £3
GRANADA 3V Lithium Car Key Battery - CR2032From £1
Rothenberger Pipeslice - 15mmFrom £13
Deadfast Rodents Plus Rodenticide - GreenFrom £13
Colour Changing Egg Timer - B&QFrom £2
FURminator Adjustable Dematter ToolFrom £12