W7 Angel Manicure Gel 2 In 1 Base & Top Coat 15ml

No, this is a gel product designed specifically for gel manicures and requires a UV/LED lamp for curing. It is not compatible with traditional air-drying nail polishes.

When applied correctly with proper nail preparation and curing, a gel manicure using this product can last from 2 to 3 weeks without chipping or losing its shine.

No, this product is a 2-in-1 formula that functions as both a base coat and a top coat, simplifying your manicure routine.

Gel products are best removed by soaking the nails in acetone. Gently buff the surface of the gel, soak pads in acetone, place them on the nails, cover with foil, and let sit for 10-15 minutes before gently pushing off the softened gel.

You will need a UV or LED nail lamp to cure this gel product. LED lamps are generally faster, curing in about 30-60 seconds, while UV lamps typically require about 2 minutes.

The product has a subtle, refined fragrance of white florals, jasmine, and lily. While intended to be pleasant and not overpowering, individual sensitivity to scents may vary.

Ensure the bottle has not been exposed to heat or light. If slightly thickened, try gently rolling the bottle between your hands to warm and thin the product. Avoid shaking vigorously, as this can introduce air bubbles.

Ensure nails were properly prepped (cleaned, dehydrated, and free of oils). Apply thin, even coats and ensure each layer is fully cured under the lamp. Check that the free edge of the nail is sealed with the top coat.

Apply thinner coats of the product. Ensure the brush is not overloaded and that application is smooth and consistent. Make sure the entire nail surface is covered evenly before curing.

Verify that you are using a compatible UV/LED lamp and that it is functioning correctly. Ensure the curing time is sufficient as per the lamp manufacturer's instructions. Avoid applying excessively thick layers, which can hinder proper curing.