Apico Tubeless Trials Rim Tape With Valve 18" - RIM TAPE 18 VAL

This Apico rim tape is specifically designed for 18-inch diameter trials motorcycle rims.

No, this product includes an integrated valve, simplifying the installation process.

This tape is intended for 18-inch trials rims and is best used with rims designed for tubeless applications. Compatibility with standard rims or rims not designed for tubeless setups may be limited.

Proper installation is key. Ensure the rim is perfectly clean, apply the tape smoothly without wrinkles, and check for air leaks with soapy water after inflation.

Tubeless setups allow for lower tire pressures, improving grip and traction, and can prevent immediate deflation from small punctures that would typically cause a pinch flat with an inner tube.

This product is supplied individually, meaning one unit covers one rim.

While it creates a tubeless seal, it's specifically marketed for 'Trials' use. For road applications, ensure the tape and tire combination meets road safety standards and is appropriate for the intended speeds and conditions.

Ensure the valve stem is pulled tight against the rim and that the base is properly sealed by the tape. Re-seat the valve and check tape adhesion around its base. Consider using a valve stem washer if available.

Verify that the rim is clean and the tape is applied smoothly without wrinkles or gaps. Ensure the tape is adhering firmly to the rim bed. The tire bead may also need to be properly seated; try slightly increasing inflation pressure momentarily (within safe limits) to pop the bead fully into place.

The rim surface may not have been clean and dry enough. Remove the tape, clean the rim again thoroughly, and reapply the tape, ensuring firm pressure during application.

Ensure the rim tape is centered and not obstructing the tire bead's seating channel. Some tires may require a higher initial inflation pressure or a bead lubricant. Confirm the tire is compatible with tubeless rims.