DAHLE 534 A3 Guillotine - 15 Sheets

The Dahle 534 A3 Guillotine is designed for A3 paper size and any smaller dimensions.

It can precisely cut up to 15 sheets of standard 70 gsm paper in a single pass.

This guillotine is optimized for standard paper weights (up to 70 gsm). Cutting thick cardstock or heavy materials may not yield clean results and is not recommended.

Utilize the centimeter and DIN markings on the table and the adjustable back-stop for precise paper alignment. The hand clamp also helps to keep the paper steady during the cut.

Yes, the Dahle 534 A3 has been tested according to GS safety regulations, and it features a hand clamp to secure the paper.

Wipe the blades gently with a dry, soft cloth. Avoid using harsh or abrasive cleaning agents to prevent damage.

Place the guillotine on a stable, flat, and level surface to ensure safe operation and accurate cutting.

Ensure you are not exceeding the 15-sheet capacity for 70 gsm paper. Check that the paper is positioned correctly and held firmly by the hand clamp. Verify the blades are clean and free of debris.

Check for any obstructions or paper fragments around the pivot point. Clean the area. If stiffness persists, a very small amount of non-silicone lubricant may be applied to the pivot mechanism.

Ensure the back-stop is fully engaged and the locking mechanism (if present) is tightened securely against the guide rail. Check for any debris preventing smooth movement.

Verify that the paper is flush against the back-stop and the cutting line. Ensure the full downward motion of the cutting arm is utilized. If the issue persists, the blades may require professional sharpening or replacement.