Electric Winch 1360 KG - Roller Fairlead - Wireless Remote Control

This electric winch is specifically designed for vehicle recovery. It features a free spool clutch...

Best current price£108.99from OnBuy.com

All Offers

2 offers from £108.99

View price history by clicking the chart icon.

OnBuy.comVidaxl Electric Winch 1360Kg Wireless Remote Control Truck Trailer Profession 8718475863489
Free delivery in 1–3 days
£108.99
Visit shop

Product Information

Full details

This VidaXL electric winch is designed for vehicle recovery, offering a 1360 KG (2998 lbs) line pull capacity. Its key benefit is the free-spool clutch, allowing manual rope extension without power. A potential caveat is its intermittent duty rating, meaning it's best suited for occasional use rather than continuous operation. Features include a permanent magnet motor, roller fairlead, wireless remote, and mounting hardware, making it a practical addition for off-road enthusiasts or those needing assistance with lifting or pulling moderate loads.

All features

BrandVidaXL

Extended Product Information

FAQs

What is 'intermittent duty' for this winch?

Intermittent duty means the winch is designed for short periods of operation followed by cool-down periods. It is not intended for continuous or prolonged use, which could lead to overheating and damage.

Can I use this winch for lifting heavy objects vertically?

While it has a 1360 KG pull rating, it's primarily designed for vehicle recovery and pulling on a relatively level plane. Vertical lifting requires specific safety considerations and may exceed the winch's design limitations. Always consult safety guidelines for lifting operations.

How do I engage or disengage the free spool clutch?

To disengage the clutch for manual rope payout, pull the knob outwards and turn it. To engage the clutch for electric winding, push the knob inwards and turn it.

What type of power source is required?

This winch requires a 12V DC power source, typically from a vehicle battery. Ensure the source can provide the necessary amperage (up to 145 Amp).

Is the mounting plate universal?

The included mounting plate is designed for use with this specific winch model. Compatibility with vehicle bumpers or frames will depend on the mounting hole pattern and available space.

How long is the wire rope?

The wire rope is 9 meters (approximately 29.5 feet) long.

Does it come with all necessary wiring?

Yes, delivery includes the power cable and a wire remote control, along with mounting accessories.

Troubleshooting

Winch not powering on

Check the 12V power supply connection and ensure correct polarity. Verify battery charge. Inspect power cables for damage.

Wire rope won't extend (free spool)

Ensure the pull and turn knob for the free spool clutch is fully disengaged (pulled out and turned). Check for obstructions in the gearbox.

Slow or weak pulling performance

Verify the 12V power supply is stable and sufficient. Check the wire rope for tangles or excessive tension plate drag. Inspect motor brushes for wear.

Remote control not working

Replace the 12V 23A alkaline battery in the wireless remote. Ensure the remote is within range and not obstructed. Check the receiver connection.

Overheating during use

The winch is rated for intermittent duty. Allow adequate cool-down periods between pulls. Avoid exceeding the maximum rated line pull.

Pros and Cons

Pros

  • Convenient wireless remote control for safe operation from a distance.
  • Free spool clutch allows for quick manual rope payout.
  • Includes essential accessories like a mounting plate and roller fairlead.
  • Compact design with a 9-meter wire rope length.
  • Suitable for moderate vehicle recovery and pulling tasks.

Cons

  • Designed for intermittent duty, not continuous operation.
  • Requires a 12V DC power source.
  • Relatively lower power capacity compared to heavy-duty industrial winches.
  • Battery for the wireless remote is not included.
  • Technical skill may be required for proper installation and use.

Setup, Compatibility & Care

Setup:

  1. Mount the winch securely to a stable frame or bumper using the provided mounting plate and hardware. Ensure the mounting surface can handle the winch's pulling force.
  2. Attach the roller fairlead to the mounting plate.
  3. Connect the power cable to a suitable 12V DC power source (e.g., vehicle battery), observing correct polarity.
  4. Connect the control unit (wire or wireless receiver) to the winch motor and power source as per the manual.
  5. Thread the wire rope through the fairlead and attach the hook.

Compatibility:

  • Requires a 12V DC power supply.
  • Suitable for vehicles or situations where a 1360 KG pull capacity is adequate.
  • Mounting dimensions should be checked against the intended installation point.

Care:

  • Keep the wire rope clean and free of kinks or damage. Inspect regularly.
  • Lubricate moving parts as recommended.
  • Store the winch in a dry environment when not in use.
  • Test the free spool clutch and remote controls periodically.
  • Clean the exterior with a damp cloth; avoid abrasive cleaners.

Price History

DatePrice
Visit shop