JBL ProFlora CO2 Adapt U-u201 - JBL
Best current price£13.59from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£13.59Visit shop JBL ProFlora CO2 Adapt U-u201
Visit shopeBay£13.59Visit shop All Offers
3 offers from £13.59 - £19.02
View price history by clicking the chart icon.
Product Information
Full details
The JBL ProFlora CO2 Adapt U-u201 is an essential accessory for aquarium enthusiasts who need to bridge the gap between different CO2 system components, specifically allowing regulators with a 5/8 inch UNF thread to connect to disposable cylinders featuring an M10x1 thread. It is ideal for hobbyists upgrading their CO2 setups or those switching between different cylinder sizes like the JBL ProFlora 500 U and 1200 U, though users should note it is strictly for specialized thread conversion and not intended for structural load-bearing applications.
All features
| Brand | JBL |
|---|
Extended Product Information
FAQs
Is this adapter permanent?
No, the adapter can be unscrewed and removed at any time if you decide to change your cylinder type or regulator.
Does this work with non-JBL cylinders?
It is designed for standard M10x1 threading; it may work with third-party cylinders, provided they strictly adhere to that threading standard.
Can I use this for non-CO2 gases?
This product is engineered and tested specifically for aquarium CO2 systems and should not be used with other pressurized gases.
What tools are needed for installation?
The adapter is designed for hand-tightening. Using metal tools may damage the finish or the threads.
Does this include an O-ring?
Always inspect the product packaging; if the seal is not holding, ensure the cylinder valve interface is clean and flat.
Troubleshooting
Hissing sound after connection
The seal is not tight; unscrew and check for proper alignment before re-tightening firmly.
Adapter will not thread onto the regulator
Verify that you are matching the 5/8 inch UNF thread; do not force the component if it does not spin on smoothly.
Pros and Cons
Pros
- Quick and easy installation process
- High-quality threading for a leak-proof fit
- Compact size minimizes space requirements in cabinetry
- Allows for greater flexibility when selecting CO2 cylinder supplies
Cons
- Compatibility limited specifically to M10x1 and 5/8 inch UNF threads
- Requires careful alignment to avoid cross-threading during installation
- Adds an additional connection point that requires periodic inspection
Setup, Compatibility & Care
To install, ensure the CO2 system is fully closed and the cylinder is disconnected. Screw the adapter into the pressure reducer threads by hand until tight; avoid using heavy pliers to prevent stripping the threads. Once the adapter is secured to the regulator, screw the disposable CO2 cylinder into the open end of the adapter. For maintenance, periodically wipe the threads with a clean, dry cloth to remove any debris or moisture that might accumulate near the cylinder valve. Always ensure the O-rings (if present) are intact to prevent gas leaks over time.