Best current price£118.99from eBay
Shopping.co.uk recommended and popular offers
eBay£118.99Visit shop Bathtub Waste With Overflow Pipe Drain Trap Antique Brass
Visit shop
B&Q£124.99Visit shop B&Q - Alcaplast Bathtub Flexible Overflow Pipe Waste Drain Trap With Antique Brass Endings
Visit shop2 offers from £118.99 - £124.99
View price history by clicking the chart icon.
This Alcaplast Bathtub Waste with Overflow Pipe Drain Trap in Antique Brass is designed for homeowners and plumbers seeking an effective and stylish solution for draining standard bathtubs. Its primary benefit is the combined waste and overflow system with a wet odour trap that prevents sewer gases from entering the bathroom, complemented by a convenient pop-up mechanism and an elegant antique brass finish. A potential caveat is the specific requirement for a Ø52mm drain outlet, which may not fit all bathtubs.
| Brand | Alcaplast |
|---|
This bathtub waste trap is designed for a drain outlet of Ø52mm.
Wipe with a soft, damp cloth. Avoid abrasive cleaners or chemicals that could damage the finish.
The main drain flow rate is 51.6 liters per minute, and the overflow flow rate is 42 liters per minute.
Yes, it features a wet odour trap designed to block sewer gases from entering the bathroom.
Basic plumbing knowledge is recommended for installation. If you are unsure, it is best to hire a qualified plumber.
The flexi pipe included has a length of 100 cm.
The odour trap has a thermal resistance of up to 95°C.
Check the drain for hair or debris. Clean the pop-up mechanism and the trap. Ensure the flexi pipe is not kinked or blocked.
Ensure the wet odour trap is correctly installed and contains water. Check if the water seal has evaporated due to infrequent use; run water in the sink to refill the trap.
Verify that all connections are tight and that seals are correctly placed and undamaged. Retighten fittings if necessary.
Inspect the mechanism for obstructions. Clean any debris around the pop-up stopper and its seating.
Compatibility: This bathtub waste system is designed for standard bathtubs with a drain outlet measuring Ø52mm. Ensure your bathtub's drain opening matches this specification before installation. The flexi pipe has a length of 100 cm, providing some flexibility in connecting to the waste pipe.
Setup: Installation typically involves assembling the waste, overflow, and trap components. Ensure all seals are properly seated to prevent leaks. Connect the swivel elbow to the trap and then attach the flexi pipe to the outlet. For detailed step-by-step instructions, refer to the manufacturer's installation manual. It is recommended that installation be performed by a qualified plumber if you are not experienced with plumbing.
Care: To maintain the antique brass finish, clean the components regularly with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish. Periodically check the pop-up mechanism and the drain for any debris that might impede its function. Ensure the overflow grille is clear of hair and soap scum.
