Amtech Club Hammer - 1kg

Club hammers are designed for striking tasks that require significant force, such as driving cold chisels, brick bolsters, or for light demolition work.

The 1kg weight provides substantial striking power, ideal for users comfortable with heavier tools. It may be fatiguing for prolonged overhead tasks or for individuals unaccustomed to heavier hammers.

Keep the handle clean and dry. Periodically apply a wood oil like linseed oil if it appears dry. Inspect regularly for cracks or looseness.

No, this club hammer is too heavy and designed for forceful striking rather than general carpentry, which typically requires lighter hammers like claw hammers.

'Drop forged' means the steel head was shaped by hammering it into a die under high pressure. This process creates a stronger, more durable grain structure in the metal compared to casting.

It's good practice to check the hammer head's security before each use, especially after significant work or if the hammer has been stored for a while.

Stop using the hammer immediately. If the head is significantly loose, it may require re-wedging or replacement. Minor looseness might be addressed by allowing the wood to swell in a humid environment temporarily, but professional assessment is recommended for safety.

Apply a light coat of wood oil (e.g., linseed oil) to the handle. Allow it to soak in and wipe off any excess. If cracks are deep or compromising the handle's integrity, discontinue use and consider replacing the handle or hammer.

Inspect the striking face regularly. Light burrs can sometimes be smoothed with a file, but significant chips or damage indicate the hammer may be nearing the end of its safe operational life and should be replaced.