Pro-Matic Colour Coat Antique Ivory Cream Gloss Spray Paint 400ml - RAL 1014

For best results, shake the can vigorously for two minutes, hold it 10-12 inches from the surface, and apply in thin, even coats with a steady back-and-forth motion. Overlap each stroke slightly.

ColourCoat is fast-drying. It typically dries to touch within 15-30 minutes, with recoat times around 1 hour. Full cure can take up to 24-48 hours, depending on conditions.

Yes, ColourCoat is suitable for interior furniture. Its low VOC content makes it a safer choice for indoor applications, provided there is adequate ventilation during application.

This paint is suitable for wood, metal, plaster, and masonry surfaces. Ensure the surface is clean, dry, and properly prepared for optimal adhesion.

For spray applicators, clean immediately after use with a suitable solvent like mineral spirits or lacquer thinner. For brushes, use the same solvent.

Yes, ColourCoat is formulated to be UV resistant, providing protection against fading when used outdoors or in direct sunlight.

Coverage can vary, but typically two thin, even coats are recommended for optimal color depth and durability. Always allow adequate drying time between coats.

Shake the can more vigorously for an extended period. Clear the nozzle by inverting the can and spraying for a few seconds. If blockage persists, remove the nozzle and clean with a suitable solvent, then reattach.

Apply paint in thin, even coats from the recommended distance (10-12 inches). Avoid applying too much paint at once. If runs occur, allow to dry fully, then lightly sand and reapply thin coats.

Ensure the surface was properly cleaned and prepared before application. Lightly sand the surface and reapply using thin coats. Check for incompatible surface treatments.

Ensure application occurred within the recommended temperature and humidity range. Avoid applying excessively thick coats. Allow more time in cool or humid conditions.