Bosch Rotary Nozzle - Bosch Home and Garden

This rotary nozzle is ideal for tough, durable surfaces such as stone, masonry, concrete, and robust garden furniture. It is not recommended for delicate or easily damaged materials.

No, this nozzle is specifically designed for compatibility with certain Bosch pressure washer models, including the EasyAquatak, UniversalAquatak, AdvancedAquatak, and AQT series. Always check your pressure washer's manual and the nozzle's compatibility list.

After each use, rinse the nozzle thoroughly with clean water. You can use a soft brush to dislodge any stubborn debris from the nozzle opening. Store it in a dry place.

The Bosch Rotary Nozzle is designed to be used with pressure washers delivering up to 140 bar.

While powerful, the rotating jet is generally safe for hard surfaces like stone and concrete. However, always start with a lower pressure setting if available and test on an inconspicuous area first, especially if the patio material is older or has been previously damaged.

A standard nozzle typically produces a fan-shaped spray pattern. A rotary nozzle creates a high-speed rotating jet of water, which provides a more concentrated and powerful cleaning action ideal for breaking down stubborn dirt and grime.

Ensure the lance connection is clean and free of debris. Check that you are using the correct nozzle for your specific Bosch pressure washer model and that it is fully seated until it locks.

Verify that the connected pressure washer is operating at an adequate pressure (up to 140 bar). Check for blockages in the nozzle tip or the pressure washer's hose and filter. Ensure the nozzle is properly attached.

Inspect the connection between the nozzle and the lance for any damage or wear. Ensure the O-rings or seals are intact and properly seated. If the connection is worn, the nozzle may need replacement.