Freefoam Soffit Board - 200mm - Storm Grey

These 10mm Storm Grey Smooth Plain Soffit Boards (RAL 7045) are supplied in 5-metre lengths and de...

Best current price£88.69from Professional Building Supplies

All Offers

2 offers from £88.69 - £97.56

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam Grey 200Mm Storm Smooth Soffit Board - 10Mm X 5Mtr - Pack Of 2
Free delivery in 1–3 days
£88.69
Visit shop
PVC Cladding UKFreefoam Grey 200Mm Storm Smooth Soffit Board - 10Mm X 5Mtr - Pack Of 2
Free delivery in 1–3 days
£97.56
Visit shop

Product Information

Full details

The Freefoam 200mm Storm Grey Smooth Plain Soffit Board is designed for homeowners and contractors seeking a durable, low-maintenance solution to protect roof overhangs and rafters from moisture damage. Ideal for both new builds and renovation projects, these 10mm thick uPVC boards provide a sleek, modern finish in RAL 7045 that eliminates the need for periodic painting or timber maintenance; however, installers must ensure accurate spacing of supports to maintain structural integrity over long spans.

All features

Model Part NumberGPB200SG
BrandFreefoam

Extended Product Information

FAQs

What is the length of each board?

Each Freefoam Soffit Board is supplied in a 5-metre length.

Can I paint these boards a different color?

No, these boards are finished with a durable, smooth Storm Grey coating and are not designed to be repainted.

What is the RAL color code for these boards?

The Storm Grey finish corresponds to RAL 7045.

Are these boards suitable for commercial buildings?

Yes, they are suitable for both residential and light commercial installations.

Do I need special fixings?

We recommend using 40mm polytop pins that match the grey color for a flush, weather-resistant finish.

Troubleshooting

Board appearing to sag between supports

Verify that fixings are spaced no more than 400mm apart and ensure the underlying timber framework is level.

Difficulty joining two board lengths

Ensure that an H-joint trim is utilized between segments to allow for proper thermal expansion and a clean aesthetic transition.

Pros and Cons

Pros

  • Resistant to rot and moisture-related decay
  • Modern Storm Grey finish matches contemporary architectural trends
  • Extremely low maintenance requirements compared to timber
  • Simple to cut and install on-site using standard tools

Cons

  • Requires specific 400mm support spacing to prevent sagging
  • Limited to a single width of 200mm
  • Not intended for structural load-bearing applications

Setup, Compatibility & Care

Installation should be performed using 40mm polytop pins to ensure the fixing heads blend with the Storm Grey finish. Pins must be spaced at a maximum interval of 400mm to ensure the boards remain secure against wind uplift. For board-to-board connections, use standard H-joint trims to accommodate thermal expansion. To maintain the appearance, the boards should be cleaned periodically with a soft cloth and mild soapy water; avoid the use of abrasive cleaners or solvent-based chemicals which could degrade the smooth surface finish.

Price History

DatePrice
Visit shop