Best current price£11.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.97Visit shop B&Q - Oak Santana Lime 67.5Cm X 1M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £11.97 - £12.49
View price history by clicking the chart icon.
The D-C-Fix Woodgrain Oak Santana vinyl wrap is designed for DIY enthusiasts, renters, and homeowners looking for a cost-effective way to refresh interior surfaces like kitchen doors, wardrobes, and furniture. This high-quality adhesive film provides an authentic woodgrain finish that looks like real timber, though users should be aware that proper surface preparation is essential to ensure long-term adhesion and a professional-looking, bubble-free application.
| Model Part Number | 5056525330370 |
|---|---|
| Brand | d-c-fix |
Yes, it is water-resistant and durable enough for countertops, though you should avoid placing hot pans directly on the surface.
If removed correctly by applying heat, the adhesive typically leaves little to no residue.
It is designed for smooth, flat surfaces. Texture may show through the film or prevent the adhesive from bonding properly.
The film can handle standard room temperatures, but it should not be applied near open flames or surfaces that reach high temperatures, such as induction or gas hobs.
Measure the length and width of your surface, add 5cm to each side for overlap, and calculate the total square area to determine how many rolls are required.
Yes, it is water-resistant and can be wiped down with a damp cloth and mild household detergent.
Use a pin to gently prick the center of the bubble and smooth the air out with a soft cloth.
Apply gentle heat with a hairdryer to make the material more pliable and press firmly until it cools and sets.
Carefully remove the film, clean the surface thoroughly with isopropyl alcohol, let it dry completely, and reapply a fresh piece.
Before applying the D-C-Fix vinyl, ensure the target surface is clean, dry, and completely free of dust or oils. Use a degreasing agent for kitchen surfaces if necessary. To apply, measure your surface and cut the film with a slight overlap. Peel back a small section of the backing paper and smooth the vinyl onto the surface using a soft cloth or plastic squeegee, working from the center outward to push out air bubbles. For corners, use a hairdryer on a low heat setting to soften the vinyl, allowing it to stretch and conform to the shape. For maintenance, clean the surface only with a damp cloth and mild soap; avoid harsh chemical cleaners or abrasive scouring pads, which could scratch the finish.
