B-G Racing Bullet Tip Tyre Paint Marker Pen - Yellow

You can use it on motorsport tyres, composites, plastics, metals, and rubber. For best results, ensure the surface is clean and dry.

Shake the marker well, then press the bullet tip down onto a hard surface. This action should activate the ink flow. Test on a scrap piece first.

The paint is designed to be durable and resistant to fading and smudging on appropriate surfaces. However, permanence can depend on the surface type and environmental conditions. Consider a sealant for maximum longevity on challenging surfaces.

While the marker is designed for harder surfaces like tyres, plastics, and metal, it might mark fabric or paper. However, the results may be less precise, and the ink may bleed or feather due to the absorbent nature of these materials.

The marker measures approximately 142mm in length and has a diameter of 15mm.

Yes, this B-G Racing Bullet Tip Paint Marker is available in a range of colors, including White, Red, Pink, Green, Blue, and Orange. A pack of 9 pens, featuring one of each available color, is also offered.

Store the marker with its cap on tightly in a cool, dry place, away from direct sunlight and extreme temperatures. Storing it tip-up or horizontally helps prevent ink leakage.

Shake the marker vigorously. Press the tip firmly onto a suitable surface to prime the flow. If the tip is dry, it may need to be gently moistened with water.

Apply multiple thin coats rather than one thick coat. Allow each coat to dry partially before applying the next. Ensure the surface is clean and free from dust or grease.

Gently clean the tip with a damp cloth or a cotton swab dipped in rubbing alcohol. Be careful not to damage the tip. Re-prime the marker after cleaning.

Ensure the surface was adequately prepared (clean and dry). For very smooth or non-porous surfaces, a clear sealant may be applied over the dried paint for extra durability. Adhesion varies by material.