Best current price£169.22from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£169.22Visit shop Sam Mouldings Light/Grey Double Tongue Andamp; Groove Mdf Cladding - 294Mm X 4.88Mtr
Visit shop2 offers from £169.22
View price history by clicking the chart icon.
This Double Tongue and Groove MDF Cladding is designed for professional builders and DIY enthusiasts seeking a polished, modern finish for interior wall surfaces. Offering a seamless interlocking system and a pre-finished light grey aesthetic, it serves as an efficient solution for large-scale paneling projects; however, note that being an MDF-based product, it is strictly intended for dry interior environments and should not be exposed to direct moisture or outdoor weathering.
| Model Part Number | SAM004-064205 |
|---|---|
| Brand | SAM Mouldings |
No, this product is made of MDF and should only be used in dry, internal living areas.
No, they arrive fully finished in light grey, so no painting or finishing is required.
Use a sharp, fine-tooth circular saw or a jigsaw with a down-cut blade to minimize chipping on the laminate surface.
It is highly recommended to install a timber batten framework first to allow for ventilation and a level surface.
Measure the total width of your wall in millimeters and divide by 294mm, then add 10% for cutting waste.
Check the groove for debris or factory dust and ensure the board is held at a slight angle before dropping it into the locking position.
Ensure the boards are fully pushed home; if gaps persist, verify that the underlying battens are perfectly flat and level.
Before installation, allow the boards to acclimate to the room's temperature and humidity for 48 hours. Ensure you have installed a grid of timber battens at maximum 400mm centers to provide a secure fixing surface. Use appropriate length screws or high-strength panel adhesive to secure the tongue side of the boards to the battens. For care, clean the surface only with a soft, dry, or slightly damp microfiber cloth; avoid harsh chemical cleaners or excessive water, which can cause the MDF core to swell. Always consult the manufacturer's official installation video guide to visualize the specific locking sequence for these boards.
