E-TECH XHT Extremely High Temperature Paint - SILVER

It's suitable for various metal surfaces exposed to high temperatures, such as engine blocks, exhausts, manifolds, and rocker covers.

No, this paint has superb adhesion to bare steel, so a primer is not needed.

Apply multiple thin coats for the best results. The number of coats will depend on the surface and the desired finish.

Curing times may vary depending on the environmental conditions. Always refer to the manufacturer's instructions on the product label for specific details.

Use mild soap and water to clean the painted surface. Avoid abrasive cleaners or solvents.

Yes, it is available in a choice of colors including Black, Blue, Graphite, Red, Silver, and White.

This paint is primarily designed for metal surfaces. Always test on a small, inconspicuous area first if applying to non-metal surfaces to ensure compatibility.

Ensure proper surface preparation. Remove any loose paint or rust before re-applying. Lightly sand the surface and apply another thin coat of paint.

Make sure the surface is completely clean and free of contaminants. Ensure the correct application technique is followed, and the recommended drying times are observed.

Apply multiple thin coats instead of one thick coat. Ensure even coverage with each coat. Shake the can thoroughly before each use to mix the paint properly.