Castrol React Performance Dot 4 - 1 Litre

Best current price£18.58from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£18.58Visit shop Castrol React Performance Dot 4 - 1L (15F272)
Visit shop
Best current price£18.58from eBay
Shopping.co.uk recommended and popular offers
eBay£18.58Visit shop Castrol React Performance Dot 4 - 1L (15F272)
Visit shop10 offers from £18.58 - £39.98
View price history by clicking the chart icon.
This guide is for anyone using Castrol React Performance DOT 4 brake fluid. It helps you understand the fluid's key benefits, from enhanced braking performance to its resistance to vapor lock. Note that proper installation and adherence to your vehicle's maintenance schedule are crucial for optimal results. This guide covers everything from setup and compatibility to troubleshooting common issues.
| Model Part Number | 15F272 |
|---|---|
| Brand | Castrol |
Refer to your vehicle's service manual. Typically, brake fluid should be replaced every 1-2 years or as recommended by the manufacturer, regardless of mileage.
It's generally recommended not to mix brake fluids. Always flush the system completely before switching to a new type of brake fluid.
Brake fluid can irritate the skin. Wash the affected area with soap and water immediately. If irritation persists, seek medical attention.
Take used brake fluid to a local recycling center or auto parts store that accepts used fluids. Do not pour it down the drain or into the environment.
Vapor lock occurs when brake fluid boils due to high temperatures, creating gas bubbles that reduce braking efficiency. DOT 4 fluids like Castrol React have a higher boiling point, reducing the chance of vapor lock.
Yes, Castrol React Performance DOT 4 can be used in motorcycles if your manufacturer specifies DOT 4 brake fluid.
Symptoms include a spongy brake pedal, reduced braking performance, or the brake fluid level dropping. However, regular checks and replacement according to your vehicle's manual are best.
Bleed the brake system to remove air bubbles. This is often the result of air in the brake lines, which can compromise the braking action. Ensure all fittings are tight.
Check for leaks in the brake lines and master cylinder. Inspect brake pads. A leak or worn pads can reduce braking power.
Inspect for leaks in the brake lines, calipers, and master cylinder. Repair any leaks immediately.