Best current price£37.43from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£37.43Visit shop Airbrush Precision Dual Action Airbrush Set Fe186k With Front Micro Air Adjutable Knob And 3 Different Sizes Cup And Nozzle Size For Painting Cake 6970083520358
Visit shop1 offer from £37.43
View price history by clicking the chart icon.
The Fengda FE-186K is an ideal choice for artists, hobbyists, and professionals seeking a highly versatile dual-action airbrush system for detailed work, cake decorating, or automotive graphics. Its defining benefit is the comprehensive modularity provided by the interchangeable nozzle sizes and gravity feed cups, allowing for precise control across various project scales. A notable caveat for beginners is the learning curve associated with managing the dual-action trigger and micro air regulator, which requires practice to master fluid paint flow and pressure consistency.
| Colour | Silver |
|---|---|
| Model Part Number | FE-186K |
| Brand | Fengda |
No, the FE-186K is the airbrush unit itself and requires a separate compressor for operation.
The 0.30mm nozzle is pre-mounted and serves as a perfect middle-ground for most general painting tasks.
Yes, it is suitable for automotive graphics, provided the paint is properly reduced to the correct viscosity.
You should perform a thorough cleaning after every painting session to prevent paint from drying inside the internal passages.
The 0.20mm nozzle is very fine and requires precise paint thinning, so it is recommended to practice with the 0.30mm or 0.50mm first.
Check if the nozzle is loose, the needle is damaged, or the paint is too thick and needs further thinning.
Verify that the needle is fully seated, the fluid cup is clean, and the air passage is not blocked by dried paint.
This typically indicates a loose nozzle or a missing/damaged nozzle gasket allowing air to backflow into the cup.
Setting up the FE-186K involves selecting the nozzle and needle combo that matches your project needs and securing the appropriate gravity cup. Ensure the nozzle cap is tightened finger-tight; do not overtighten, as this can damage the internal seals. Compatibility-wise, the airbrush uses a standard connection, making it compatible with most standard airbrush compressors using a 1/8-inch hose. Care is critical: flush the unit with an appropriate cleaning solvent or water immediately after every use. Never soak the entire body of the airbrush in solvent, as this can destroy the rubber O-rings. Regularly check the needle for bends, as a damaged needle will result in a splattered spray pattern.
