Holts Cataloy Car Body Repair System - 100g

It can be used on bare metal, primer, and with body filler paste. It's suitable for all car finishes.

Drying time depends on environmental conditions. Always refer to the product instructions for specific drying times.

Yes, sanding is required after the putty dries to create a smooth surface ready for painting.

While it can fill deep scratches, very deep damage may require multiple applications. For extensive damage, consider professional bodywork.

Store the tube in a cool, dry place away from direct sunlight. Make sure the tube is properly sealed after use.

Always check the product packaging for the expiration date. Properly stored, it should last for a reasonable period.

Yes, it is recommended to apply primer over the filled area before applying the final coat of paint for the best results.

Wash the affected area thoroughly with soap and water. If irritation persists, consult a doctor.

Ensure the product is within its expiry date. Make sure the application area is clean and free of contaminants. Ensure the environmental conditions are suitable (temperature and humidity).

Apply the putty in thinner layers. Ensure that the surface is properly prepared before application. Excessive thickness can lead to cracking.

Allow the putty to dry completely. Use the appropriate grit sandpaper (start with a coarser grit and move to finer grits). Apply even pressure during sanding.

Ensure the putty is completely dry and sanded smooth. Apply a primer before painting.