Line Pins With 8M Lining - B&Q

The set includes a line that is approximately 8 meters long.

The pins are forged from a single piece of hardened steel and are chrome-plated.

You insert the pins into mortar joints at the ends of the course you are laying, then stretch the line between them to guide the placement of bricks.

While they can be staked into the ground, they work best on firm ground. For very soft soil, additional support might be needed under the pin.

Yes, they have a chrome-plated finish which is designed to prevent rust and wear.

Each pin is 6 inches (approximately 160mm) long.

The set includes two line pins.

Ensure the pins are inserted into a firm mortar joint or a sufficiently compacted area of ground. For very soft ground, consider using a small, flat object beneath the pin base for added stability.

Check that both pins are perfectly vertical and that the line is pulled taut. Ensure the line is not snagged on any obstructions.

If hammered deeply into hard ground, try wiggling the pin gently side-to-side while pulling upwards. Avoid excessive force that could bend the pin.

Minor damage will not affect function. For significant corrosion, clean the affected area and apply a thin coat of protective oil to prevent further rust.