Hella Halogen 7 Inch E-Approved Headlamp Unit RHD - Hella - 1L6002395-261

The Hella 7 Inch E-Approved Headlight Light Lamp Conversion for RHD vehicles is an ideal upgrade f...

Best current price£38.51from eBay

All Offers

11 offers from £38.51 - £43.26

View price history by clicking the chart icon.

eBayHELLA 1L6 002 395-261 INSERT HEADLIGHT Left,Right
Free delivery in 1–3 days
£38.51
Visit shop
Demon TweeksHella 7 Inch E-Approved Headlight Conversion
£7.94 delivery
£43.26
Visit shop

Product Information

Full details

This guide provides essential information for owners of the Hella 7 Inch E-Approved Headlamp Unit (1L6002395-261) designed for right-hand drive (RHD) vehicles, especially classic cars. These headlamps significantly improve nighttime visibility and safety compared to older sealed beam units. Please note that bulbs are not included and must be purchased separately.

All features

Model Part Number1L6002395-261
BrandHella

Extended Product Information

FAQs

What type of bulbs does this headlamp use?

This headlamp uses H4 bulbs for the main and dipped beams and T4W bulbs for the sidelights.

Are the bulbs included?

No, the bulbs are not included and must be purchased separately.

Is this headlamp suitable for left-hand drive vehicles?

No, this headlamp is designed for right-hand drive (RHD) vehicles only.

What is the diameter of the headlamp?

The diameter of the headlamp is 169mm.

What is the lens material?

The lens material is glass.

What light functions does this headlamp provide?

This headlamp provides low beam, high beam, and position light functions.

How do I clean the headlamp lens?

Clean the glass lens regularly with a mild detergent and a soft cloth. Avoid using abrasive cleaners.

What is the housing color?

The housing color is Chrome/Black.

Troubleshooting

Headlight doesn't turn on.

Check the bulb connections and ensure the bulbs are properly installed. Inspect the wiring and fuses for any damage or blown fuses. Test the ground connection.

Headlight beam is misaligned.

Adjust the headlight aim using the adjustment screws on the headlamp housing. Refer to your vehicle's manual for proper alignment procedures.

Water condensation inside the headlamp.

Check the seals around the lens and housing for any damage or gaps. Ensure the vent is not blocked. If condensation persists, consult a professional.

Flickering lights.

Inspect the wiring connections for loose connections. Replace the bulb to see if it is faulty.

Pros and Cons

Pros

  • Improved Night Visibility: Offers significantly brighter and clearer light compared to older sealed beam headlights, enhancing safety.
  • Enhanced Safety: Better illumination helps drivers see and react to hazards more effectively.
  • Classic Car Compatibility: Specifically designed for classic and vintage vehicles with a 7-inch headlight size.
  • E-Approved: Complies with European safety regulations for road use.
  • Easy Installation: Designed as a direct replacement, simplifying the upgrade process.
  • Durable Build: The glass lens and robust construction ensure a long lifespan.

Cons

  • Bulbs Not Included: Requires separate purchase of H4 and T4W bulbs, adding to the initial cost.
  • RHD Only: Not suitable for left-hand drive vehicles.
  • May Require Adjustment: Headlight alignment may be needed after installation to ensure optimal performance.
  • Potential Wiring Modifications: Depending on the vehicle, some wiring adjustments might be necessary.
  • Cost: The initial cost is higher compared to basic sealed beam units.
  • Limited Availability: May not be as readily available as some other headlight options.

Setup, Compatibility & Care

  1. Compatibility: Ensure the headlamp is compatible with your right-hand drive vehicle and that your vehicle uses 7-inch round headlights. Verify the E-approval (04.07.2025).
  2. Bulb Installation: Install H4 bulbs for the main and dipped beams, and T4W bulbs for the sidelights. (Bulbs not included).
  3. Wiring: Connect the headlamp to your vehicle's existing headlight wiring harness. You might need to use the existing connectors or purchase an adapter.
  4. Mounting: Securely mount the headlamp into the headlight bucket.
  5. Alignment: Adjust the headlamp's aim to ensure the light beam is correctly aligned.
  6. Care: Clean the glass lens regularly with a mild detergent and a soft cloth. Avoid using abrasive cleaners that could scratch the lens. Inspect the wiring and connections periodically for corrosion or damage.

Price History

DatePrice
Visit shop