Tamiya Spray Paint - TS-16 Yellow - 100ml
Best current price£13.95from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£13.95Visit shop TAMIYA TS-16 Yellow 100ml Plastic Model Kit Spray Paint 85016
Visit shopeBay£13.95Visit shop All Offers
2 offers from £13.95
View price history by clicking the chart icon.
eBayTAMIYA TS-16 Yellow 100ml Plastic Model Kit Spray Paint 85016
Free delivery in 1–3 days
£13.95
Visit shop
Product Information
Full details
This Tamiya TS-16 Yellow spray paint is for model enthusiasts seeking a quick and durable finish for large model surfaces. Its key benefit is a fast-curing synthetic lacquer that won't be affected by subsequent acrylic or enamel detailing. A key caveat is that it is not suitable for polycarbonate RC car bodies, which require Tamiya PS paints.
All features
| Model Part Number | 85016 |
|---|---|
| Brand | Tamiya |
Extended Product Information
FAQs
What is the best way to prepare a model for Tamiya TS spray paint?
Clean the model surface thoroughly with soap and water or a degreaser to remove any dust, oils, or mold release agents. Ensure the surface is completely dry before painting.
Can I use Tamiya TS-16 Yellow on other brands of plastic models?
Yes, Tamiya TS spray paints are generally compatible with most common plastic model kit materials. However, always test on a small, inconspicuous area first if you are unsure.
How long does it take for the paint to cure?
The paint cures quickly, allowing for handling and further detailing within a few hours under normal conditions. A full, hard cure may take 24 hours or more.
What should I do if I accidentally paint a polycarbonate RC body with this paint?
Act immediately. Try to wipe off the wet paint with a cloth dampened with a compatible solvent (check Tamiya recommendations). If dry, you may need to carefully sand it off or use a specialized plastic stripper, being cautious not to damage the polycarbonate.
How many coats are typically recommended?
It is recommended to apply several thin, even coats rather than one thick coat. Allow a few minutes of drying time between each coat for best results and to avoid runs.
Is Tamiya TS-16 Yellow a glossy or matte finish?
Tamiya TS spray paints typically provide a gloss finish. Subsequent clear coats or weathering techniques can be used to achieve matte or satin effects if desired.
Can I use this paint indoors?
It is strongly advised to use this paint in a well-ventilated area, ideally outdoors or in a spray booth with proper extraction, due to the nature of the solvents and to avoid inhaling fumes.
Troubleshooting
Uneven spray or splattering
Ensure the can is shaken thoroughly before and during use. Check that the nozzle is not clogged. Try spraying from a slightly further distance.
Paint not adhering properly
Verify the model surface is clean, dry, and free from mold release agents or grease. Ensure the temperature and humidity are within recommended levels for spraying.
Clogged nozzle after use
Immediately after spraying, invert the can and spray for 2-3 seconds to clear the nozzle. If a clog persists, gently remove the nozzle and soak it in lacquer thinner, then rinse with water and dry before reattaching.
Paint is too thin or transparent
Apply multiple thin coats rather than one heavy coat. Allow adequate drying time between coats. Ensure the can is held at the correct distance.
Pros and Cons
Pros
- Durable and smooth finish.
- Quick drying time speeds up the modeling process.
- Allows for subsequent detailing with various paint types.
- Good coverage for its size.
- Easy to apply for large areas.
Cons
- Not suitable for polycarbonate (Lexan) RC bodies.
- Requires good ventilation during use.
- Color selection is specific to the TS-16 Yellow variant.
Setup, Compatibility & Care
Setup: Ensure the model surface is clean, dry, and free from grease or dust. For best results, apply in a well-ventilated area away from direct sunlight and moisture. Shake the can vigorously for at least one minute after the mixing ball begins to rattle. Hold the can upright and spray from a distance of 25-30 cm (10-12 inches).
Compatibility: This TS series paint is designed for general plastic model kits. It is not compatible with clear Polycarbonate/LEXAN R/C body shells, as it will cause the material to become brittle and flake off. For polycarbonate applications, use Tamiya PS spray paints instead.
Care: Store cans in a cool, dry place. After use, invert the can and spray for a few seconds to clear the nozzle. Clean any accidental spills immediately with a suitable solvent if possible, though dried lacquer can be difficult to remove.