Best current price£18.95from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£18.95Visit shop Geberit Mapress Copper Press-Fit Tap Connector (Gas) 15Mmx1/2" 34731
Visit shop
B&Q£24.64Visit shop B&Q - Mapress Copper Press-Fit Tap Connector (Gas) 15mmx1/2" 34731
Visit shop2 offers from £18.95 - £24.64
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts looking to quickly and reliably install plumbing systems using Geberit Mapress Copper Press-Fit Tap Connectors. The key benefit is a faster, more economical alternative to traditional soldering or compression fittings, enabling quicker installations. A key consideration is ensuring proper training and the use of compatible pressing tools for a secure connection.
| Model Part Number | 34731 |
|---|---|
| Brand | Geberit |
You will need a compatible pressing tool specifically designed for Geberit Mapress fittings, a pipe cutter, and a deburring tool.
No, ensure the pipe is compatible with the Geberit Mapress system. Check the specifications for pipe diameter and material compatibility.
Yes, Geberit Mapress fittings are suitable for gas lines, but always ensure proper installation and follow local codes and regulations.
Make sure the pipe is inserted fully into the fitting, the pipe is clean, and the fitting is pressed correctly using the proper tool and jaws.
No, Mapress fittings are designed for single-use. Once pressed, they should not be removed or reused.
Warranty information can be found on the Geberit website or product packaging. Typically, Geberit products have a manufacturer's warranty against defects.
Installation instructions are available from Geberit's website, or included in the product packaging. You can also consult with a professional plumber.
Store the fittings in a clean, dry environment, away from direct sunlight and extreme temperatures, until ready for use.
Check if the pipe was fully inserted. Re-press the fitting with the correct pressing tool if necessary. Ensure the pipe and fitting are compatible.
Ensure the pressing tool is properly calibrated and the jaws are compatible with the fitting size. Check the tool's power source if applicable.
Ensure the copper pipe is clean and free from debris. Check the fitting for any damage before installation. Replace the fitting if necessary.
