Best current price£23.19from eBay
Shopping.co.uk recommended and popular offers
eBay£23.19Visit shop Radiator Valve Reducing Elbow Stem Compression Chrome 15mm x 15mm Pushfit x 4
Visit shop
B&Q£24.09Visit shop B&Q - Radiator Valve Reducing Elbow Stem Compression Chrome 15mm X 15mm Pushfit X 4
Visit shop2 offers from £23.19 - £24.09
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts working with 15mm pipework to install or modify radiator connections. The key benefit is the easy and secure redirection of pipework using a push-fit system, reducing the need for complex fittings. A potential caveat is ensuring correct pipe preparation for a reliable seal. This product is a pack of four premium quality brass push-fit reducing elbows, finished in bright chrome, designed for 15mm pipework to change the direction of supply pipes, compatible with copper, PEX, and PB pipes.
| Colour | Silver |
|---|---|
| Brand | SPARES2GO |
This is a 15mm push-fit reducing elbow used to change the direction of a 15mm pipe by 90 degrees, commonly used when installing or modifying radiator pipework.
These elbows are compatible with 15mm copper, PEX, and PB pipes.
No, these are push-fit fittings and do not require soldering or specialized tools. A pipe cutter and potentially a depth gauge are recommended for proper installation.
While designed for central heating systems, their suitability for other applications like potable water depends on specific system requirements and local regulations. Always confirm compatibility for your intended use.
Most push-fit systems have a release collar or mechanism at the fitting end. Push this collar inwards while pulling the pipe to release it.
In this context, 'Reducing' refers to the connection size (15mm x 15mm), and 'Elbow' refers to the 90-degree angle. It indicates a fitting that changes pipe direction and connects to specific pipe sizes.
Each pack contains four (4) 15mm x 15mm pushfit radiator valve reducing elbow stem compression fittings.
Ensure the pipe was fully inserted and clean. Remove the fitting, clean the pipe end, and re-insert firmly. Check the pipe for damage.
Verify you are using the correct 15mm pipe. Ensure the pipe end is cut square and free of burrs. Lightly lubricate the pipe end with water or silicone grease if necessary.
The pipe may not have been inserted far enough. Remove the fitting and re-insert until the depth mark is met. Check the pipe for damage or deformation.
Setup:
Compatibility:
Care:
