Shopping.co.uk

Snatch Block - Hook - 10 Inch - 12 Ton

Snatch Block - Hook - 10 Inch - 12 Ton

Lightweight Heavy Duty Snatch Pulley Block, Swivel Safety Hook. Head Load = 12 Tonnes, Sheave DIA ...

Best current price£225.00from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£225.00Visit shop

B&Q - Snatch Block With Hook 12T 10" (Heavy Duty Pulley Swivel 12 Ton 10 Inch Lightweight)

Visit shop

All Offers

2 offers from £225.00

View price history by clicking the chart icon.

B&QB&Q - Snatch Block With Hook 12T 10" (Heavy Duty Pulley Swivel 12 Ton 10 Inch Lightweight)
Free delivery in 1–3 days
£225.00
Visit shop
OnBuy.com(Hook, 10 Inch - 12 Ton) Heavy Duty Winch Snatch Block (Lightweight Pulley) 600988576766
Free delivery in 1–3 days
£225.00
Visit shop

Product Information

Full details

This SecureFix Direct 10-inch Snatch Block is designed for professionals in industries requiring heavy-duty lifting, pulling, towing, and re-directing of wire ropes up to 12 tonnes. Its key benefit is the integrated swivel safety hook and roller bearing sheave for efficient, high-speed operations, allowing wire rope to be attached without threading. A potential caveat for users is the need for proper understanding of its load limits and safe operating procedures to ensure longevity and safety.

All features

BrandSecureFix Direct

Extended Product Information

FAQs

What type of wire rope is compatible with this snatch block?

This snatch block is designed for wire rope with diameters between 24MM and 26MM.

What is the maximum load this snatch block can handle?

The maximum Head Load capacity for this snatch block is 12 Tonnes (12,000 KGS).

Does a test certificate come with the product?

Yes, a test certificate is included and will be sent via email upon purchase.

What does 'snatch' in 'snatch block' refer to?

A snatch block is designed to be attached to a load or anchor point and allows a rope or cable to be easily attached and redirected without needing to be threaded through the sheave, making it useful for quick rigging changes.

Can this snatch block be used for shock loading?

While designed for heavy duty, it is not specifically rated for continuous or extreme shock loading. It is best used for steady lifting and pulling applications within its load limits.

How often should I inspect the snatch block?

It is recommended to conduct a visual inspection before each use, checking for any signs of wear, damage, or deformation.

What are the overall dimensions of the block?

The overall height is 695MM, the side width is 114MM, and the front width is 260MM.

Troubleshooting

Sheave does not spin freely

Check for debris lodged in the sheave or roller bearing. Inspect for damage. If necessary, clean and lubricate the bearing according to care instructions.

Hook does not close or latch properly

Inspect the hook and latch mechanism for damage or obstructions. Ensure the wire rope is correctly seated and not preventing closure. Do not force the latch.

Visible signs of wear or damage on the block body or hook

Immediately remove the snatch block from service. Do not use. Contact SecureFix Direct or a qualified inspector for assessment or replacement.

Noise during operation

This could indicate a worn or dry roller bearing. Inspect, clean, and lubricate the bearing. If noise persists, the bearing may need replacement.

Pros and Cons

Pros

  • High load capacity (12 Tonnes) for heavy-duty use.
  • Efficient wire rope attachment via swivel hook and gate design.
  • Suitable for high-speed operations due to roller bearing sheave.
  • Complies with relevant European safety standards.
  • Comes with a test certificate for assurance.

Cons

  • Requires careful adherence to load limits to prevent failure.
  • Not designed for continuous shock loading.
  • Maintenance is crucial for optimal performance and safety.
  • Relatively heavy (36KGS), requiring secure mounting.
  • Primarily designed for wire rope, not other types of cable.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the snatch block is securely mounted to a fixed point or a suitable anchor capable of handling the load.
  2. Open the gate on the side of the block.
  3. Place the wire rope (24-26MM diameter) into the sheave.
  4. Close the gate securely. Ensure it is fully latched.
  5. Connect your lifting or pulling apparatus to the swivel safety hook.

Compatibility:

  • This block is designed for wire rope with diameters between 24MM and 26MM.
  • It is rated for a maximum Head Load of 12 Tonnes.
  • Always ensure your lifting/pulling system's components are compatible and rated for the intended load.

Care:

  • Inspection: Regularly inspect the sheave, hook, gate mechanism, and structural integrity for wear, damage, or deformation before each use.
  • Lubrication: Periodically lubricate the roller bearing sheave according to manufacturer recommendations or best practices for industrial bearings.
  • Cleaning: Keep the block clean from dirt, grit, and corrosive substances. Use a dry or slightly damp cloth for cleaning. Avoid harsh chemicals.
  • Storage: Store in a dry environment when not in use to prevent corrosion.

Price History

DatePrice
Visit shop