HB BODY BodyAlu Aluminum Filler - Silver Grey - 1kg

Use P80-P120 grit sandpaper for sanding the HB BODY BodyAlu Aluminum Filler.

Drying time depends on temperature and humidity. Allow the filler to cure completely before sanding. Refer to the product instructions for specific curing times.

While the filler can be used on some plastics, it's primarily designed for metal surfaces. Always check for compatibility before application.

Always wear gloves, safety glasses, and a respirator when handling and sanding the filler. Ensure adequate ventilation in the work area.

Store the filler in a cool, dry place away from direct sunlight and heat. Keep the container tightly closed.

The shelf life of the filler depends on storage conditions. Check the expiration date on the product packaging.

Yes, you can apply multiple coats if necessary. Ensure each layer is fully cured before applying the next, and avoid applying excessively thick layers.

Ensure the correct ratio of filler and hardener is used. Check the expiration date of the hardener. Temperature also affects hardening; ensure the working environment is within the recommended temperature range.

Ensure the filler is applied in thin layers, allowing each layer to cure fully before applying the next. Avoid applying the filler too thick in one go. Check the surface for movement or stress.

Use the recommended grit sandpaper (P80-P120). Ensure the filler is fully cured before sanding. Use a sanding block for a more even finish.