Shopping.co.uk

Morris Lubricants Engine Oil - 0W-20 - 5L

Morris Lubricants Engine Oil - 0W-20 - 5L

MULTIVIS ECO V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savin...

Best current price£52.49from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £52.49 - £55.99

View price history by clicking the chart icon.

eBay5L Morris MULTIVIS Eco V 0W-20 Full Synthetic Engine Oil ACEA A1/B1
Free delivery in 1–3 days
£52.49
Visit shop
B&QB&Q - 0W-20 Fully Synthetic Engine Oil Mb 229.71Ford Wss-M2C947-B1 5L
Free delivery in 1–3 days
£55.99
Visit shop
OnBuy.comMorris 0W-20 Fully Synthetic Engine Oil Mb 229.71, Ford Wss-M2c947-B1 5L 5024536039742
Free delivery in 1–3 days
£55.99
Visit shop

Product Information

Full details

This Morris Lubricants 0W-20 engine oil is designed for modern passenger cars, particularly petrol engines including turbocharged variants, seeking improved fuel efficiency and component protection. Its advanced formulation offers rapid circulation for reduced cold start wear and a strong oil film for high-temperature performance. A key benefit is the potential for fuel savings, though it is crucial to ensure this specific oil grade meets your vehicle's manufacturer specifications.

All features

BrandMorris

Extended Product Information

FAQs

What is the primary benefit of using 0W-20 oil?

The primary benefit is the potential for improved fuel economy due to lower viscosity, leading to less friction. It also offers excellent cold-start protection.

Can I use this oil in my diesel engine?

This specific oil (MULTIVIS ECO V 0W-20) is primarily recommended for petrol engines. Always check your vehicle's manual or the oil's specifications to ensure it is suitable for diesel engines and meets the required diesel performance standards.

How often should I change my oil with this product?

Refer to your vehicle manufacturer's recommended oil change intervals. These intervals can vary based on driving conditions and vehicle model. Always use the specified interval in your owner's manual.

What does '0W-20' mean?

'0W' indicates the oil's viscosity at cold temperatures (W stands for Winter), meaning it flows easily when cold. '20' indicates the viscosity at operating temperatures.

Will this oil help my older car run better?

This 0W-20 oil is formulated for modern engines. Older engines may require a different viscosity grade as specified by their manufacturer. Using an incorrect viscosity can cause damage.

What are the key performance specifications this oil meets?

It meets ACEA C5, ACEA C6, API SP, API SN, API SN Plus, API SN RC, ILSAC GF-5, MB 229.71, Fiat 9.55535-GSX, Chrysler MS-12145, Ford WSS-M2C947-B1, and Volvo VCC RBSO.2AE.

Troubleshooting

Engine knocking or unusual noise after oil change

Verify that the correct 0W-20 viscosity grade and performance specifications were used. Re-check the oil level; it may be too low or too high. Ensure the oil filter was correctly installed.

Oil warning light remains illuminated

Check the oil level immediately. If the level is correct, the oil pressure sensor or the oil pump may require inspection by a qualified mechanic.

Increased oil consumption

Ensure the oil is the correct grade for your vehicle. Check for external leaks. Some oil consumption is normal, especially in high-mileage or turbocharged engines, but excessive consumption may indicate an internal engine issue.

Pros and Cons

Pros

  • Contributes to increased fuel efficiency and engine output.
  • Offers excellent protection during cold starts, reducing wear.
  • Maintains a strong protective film at high operating temperatures.
  • Helps keep the engine clean and free from sludge.
  • Suitable for a wide range of modern petrol engines, including turbocharged models.

Cons

  • Must be verified for compatibility with specific vehicle manufacturer requirements.
  • Low viscosity may not be suitable for older engines designed for thicker oils.
  • Requires careful selection to ensure it meets the exact performance specifications listed.

Setup, Compatibility & Care

Compatibility:

Always consult your vehicle's owner's manual to confirm that the Morris Lubricants MULTIVIS ECO V 0W-20 meets the required specifications for your engine. This oil is specifically recommended for petrol engines requiring compliance with ACEA C5, ACEA C6, API SP, API SN, API SN Plus, API SN RC, ILSAC GF-5, MB 229.71, Fiat 9.55535-GSX, Chrysler MS-12145, Ford WSS-M2C947-B1, or Volvo VCC RBSO.2AE. Using an incorrect oil grade can lead to engine damage.

Setup (Oil Change):

  1. Ensure the engine is warm but not hot.
  2. Safely lift and support the vehicle if necessary.
  3. Locate and remove the oil drain plug and allow the old oil to drain completely.
  4. Replace the oil filter.
  5. Reinstall the drain plug, ensuring it is tightened to the manufacturer's specification.
  6. Using a funnel, pour the correct amount of new MULTIVIS ECO V 0W-20 oil into the engine through the oil filler cap.
  7. Replace the oil filler cap and start the engine, allowing it to run for a few minutes. Check for leaks.
  8. Turn off the engine and wait for a few minutes for the oil to settle. Check the oil level using the dipstick and top up if necessary.

Care:

Store the oil container in a cool, dry place away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use. Dispose of used oil responsibly according to local regulations.

Price History

DatePrice
Visit shop