Best current price£4.76from www.lindy.co.uk
Shopping.co.uk recommended and popular offers
www.lindy.co.uk£4.76Visit shop 0.25m Power Adapter, 5.25" Power Male to 2 x 5.25" Power Fem
Visit shop1 offer from £4.76
View price history by clicking the chart icon.
This Lindy 0.25m internal power cable is for PC builders and upgraders who need to power multiple 5.25" devices from a single source. It offers a simple way to expand your power supply's connectivity. A potential drawback is its short length, which may limit placement options in larger cases.
| Colour | Multicolor |
|---|---|
| Model Part Number | 33126 |
| Brand | Lindy |
This adapter uses the 4-pin LP4 (Molex) connector for both the input from the power supply and the output to the devices.
No, this adapter is designed for 5.25" internal devices and uses LP4 connectors. Graphics cards typically require 6-pin or 8-pin PCIe power connectors.
The Lindy 33126 power adapter comes with a 10-year manufacturer's warranty.
No, this adapter is not compatible with SATA power connectors. It specifically splits LP4 connectors.
You can connect up to two devices that require a 5.25" LP4 power connection.
The 0.25-meter length is suitable for most standard ATX and smaller cases. For very large or custom-built cases, the length might be limiting.
Verify that the adapter is securely plugged into both the power supply and the devices. Ensure the power supply has enough wattage to support all connected components. Check the individual power cables of the devices for damage.
Check for loose connections at the adapter and the devices. Ensure the adapter is not being sharply bent or crimped. Test the device with a direct power connection if possible to rule out adapter issues.
Re-evaluate the internal layout of your PC case. Consider alternative routing paths or repositioning components if feasible. For significantly longer runs, a different adapter with a greater length would be necessary.
Setup: To install, disconnect power from your computer. Connect the male LP4 connector of the adapter to an available LP4 port on your power supply unit. Then, connect the two female LP4 connectors to your 5.25" devices (e.g., optical drives, card readers, fan controllers). Ensure all connections are secure.
Compatibility: This cable is specifically designed for LP4 (4-pin Molex) power connectors commonly found on older power supplies and used for 5.25" devices. It is *not* compatible with 4-pin ATX 12V CPU power connectors or SATA power connectors.
Care: Avoid excessive bending or stressing the cables. Ensure adequate airflow around the connection points within the PC case. Keep connections clean and free from dust.
