Best current price£40.77from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£40.77Visit shop Ob1 Multi-Surface Grip & Grab Adhesive 290Ml (3 Pack) - Weatherproof, High Strength, Instant Grab 5056660414232
Visit shop
B&Q£40.96Visit shop B&Q - Multi-Surface Grip & Grab Adhesive 290Ml (3 Pack)WeatherproofHigh StrengthInstant Grab
Visit shop2 offers from £40.77 - £40.96
View price history by clicking the chart icon.
This OB1 Multi-Surface Grip & Grab Adhesive is designed for trade professionals and DIYers needing a strong, fast bond for interior and exterior applications. Its key benefit is the high-strength, instant grab formula that reduces the need for temporary support. A potential caveat is the 290ml cartridge size, which may require multiple tubes for very large projects. This adhesive offers reliable, weatherproof bonding for a wide range of surfaces, making installation, fitting, and repair tasks more efficient.
| Brand | OB1 |
|---|
While OB1 Grip & Grab Adhesive provides high strength and immediate hold, it is primarily designed for fitting, installation, and repair tasks rather than primary structural load-bearing applications. Always consult relevant building codes and engineering specifications for structural elements.
Full cure times vary depending on temperature, humidity, and bead size, but typically range from 24 to 48 hours. Initial grab is achieved within minutes.
Once fully cured, the adhesive can typically be painted over. It is recommended to test compatibility with your chosen paint on a small area first.
Avoid use on certain types of polyethylene, polypropylene, PTFE, or silicone. Always test on a small area first.
No, this 290ml cartridge is designed to fit standard skeleton-style adhesive dispenser guns.
The weatherproof formula is designed for exterior use, but not for continuous submersion in water. It should not be used for underwater applications.
Seal the nozzle tightly and store in a cool, dry place. For best results, try to use opened cartridges within a reasonable timeframe.
Ensure the cartridge is properly loaded in the dispenser gun and the internal seal has been punctured. Check that the nozzle is not blocked.
Verify that surfaces are clean, dry, and free from dust, grease, or loose material. Ensure adequate pressure was applied during bonding.
Ensure adequate ventilation. Check ambient temperature and humidity, as extreme conditions can affect curing times.
Test on a small, hidden area first. Some plastics or painted surfaces may react with the adhesive; use a compatible sealant or primer if necessary.
Setup:
Compatibility:
Suitable for bonding wood, metal, brick, concrete, plaster, most plastics, and more. Always test on a small, inconspicuous area first, especially on sensitive surfaces or plastics.
Care:
