Pulsar Alaris XG30 Thermal Imaging Monoculars - 640x480

The Pulsar Alaris XG30 is capable of detecting heat sources up to 1300 meters (approximately 0.8 miles).

The device offers up to 8 hours of continuous operation on a single charge.

Yes, it features an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes.

Yes, the Alaris XG30 features built-in still image and video capture capabilities.

This refers to the resolution of the thermal sensor, which provides detailed thermal imaging.

Gently clean the germanium lens with a soft, lint-free lens cloth. Avoid using harsh chemicals or abrasive materials.

NETD (Noise Equivalent Temperature Difference) is a measure of thermal sensitivity. A lower NETD value, like the <40 NETD of the sensor in the Alaris XG30, indicates better performance in distinguishing small temperature differences.

Ensure the battery is charged. Connect the device to a power source using the provided charging cable and verify that the charging indicator is active. Try a different power outlet or USB port.

Check that the lens cap is removed and the lens is clean. Adjust the focus if applicable. Ensure the device is aimed at a sufficient heat source and that ambient conditions are not interfering with detection. Experiment with different color palettes and sensitivity amplification levels.

Perform a soft reset by holding the power button for an extended period. If the issue persists, check for any physical obstruction or damage to the buttons.

Verify that there is sufficient internal memory available (if applicable). Ensure the capture function is correctly activated according to the user manual. Try restarting the device.