Elica Aplomb Wall Extractor Hood - White Glass - A

Remove the grease filters by sliding them out. Wash them with warm, soapy water or in a dishwasher. Ensure they are completely dry before re-installing.

It is recommended to clean the grease filters every 1-2 months, depending on your cooking frequency.

The hood uses LED lighting, which is energy-efficient.

The Switch-off Delay function allows the hood to automatically shut down after a pre-set time, even after you're done cooking.

This model is designed for ducted extraction. Recirculation mode is not supported.

Replacement filters can be purchased from the manufacturer or authorized retailers.

The noise level ranges from 51 dB(A) to 64 dB(A), depending on the speed setting.

Check the power supply and ensure the circuit breaker is not tripped. Verify that the hood is correctly connected to the power outlet.

Clean or replace the grease filters. Check for any obstructions in the ductwork. Ensure the hood is set to an appropriate speed setting.

Check the light bulb and replace if necessary. Ensure the bulb is properly installed. Consult the manual for the correct bulb type.

Check if the fan is obstructed. Ensure the hood is properly mounted and secure. Reduce the fan speed if the noise is still high.