EcoAqua Water Filter Replacement - EWF-8002A
Best current price£17.95from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£17.95Visit shop B&Q - Ewf-8002A Lincat Compatible Water Filter Replacement
Visit shopB&Q£17.95Visit shop One Offer
1 offer from £17.95
View price history by clicking the chart icon.
B&QB&Q - Ewf-8002A Lincat Compatible Water Filter Replacement
Free delivery in 1–3 days
£17.95
Visit shop
Product Information
Full details
The EcoAqua EWF-8002A compatible water filter is designed for users seeking consistently clean, great-tasting water and ice. Its key benefit is reducing common contaminants like chlorine, dirt, and rust, improving both taste and odor, while also helping to reduce limescale buildup. A potential consideration is verifying compatibility with your specific water filtration system, as several Lincat models are explicitly excluded.
All features
| Model Part Number | EWF-8002A |
|---|---|
| Brand | EcoAqua |
Extended Product Information
FAQs
How often should I replace the EcoAqua EWF-8002A filter?
For optimal performance, it is recommended to replace the filter every 6 months or after filtering 4,000 liters of water, whichever comes first.
What contaminants does this filter remove?
The filter effectively removes or reduces contaminants such as chlorine, dirt, and rust, contributing to better taste and odor.
Is this filter compatible with all Lincat water boilers?
No, this filter is compatible with specific Lincat models (FC02, EB3F, EB4F, EB6F, EB6TF, EB3F/PB, EB3/PBM, WMB3F) but is explicitly incompatible with EB3FX/HC, EB3FX/PB, EB3FX, EB4FX, EB6FX, EB6TFX, EB3FX/TT.
What is the flow rate of this filter?
The flow rate for the EcoAqua EWF-8002A filter is 1.9 liters per minute (lpm).
Does this filter remove beneficial minerals?
The filter is designed to retain beneficial minerals like fluoride while removing impurities.
What is the WRAS certification?
WRAS certification indicates that the product has been tested and meets the high standards set by UK water regulators for material safety and integrity.
Can I use this filter with hot water?
The recommended operating temperature range is 0.6°C to 38°C (33°F to 100°F). It is not designed for boiling or very hot water.
Troubleshooting
Reduced water flow
The filter may be nearing the end of its life and require replacement, or there might be a blockage in the system. Check for any kinks in the water line.
Water still tastes or smells unpleasant
Ensure the filter was installed correctly and the system was flushed adequately after installation. The filter may need replacement if it's old or if the water source has significantly changed quality.
Filter leaks after installation
Check that the filter is properly seated in its housing and that all seals are clean and intact. Tighten connections as per your system's manual.
Filter does not fit
Verify that your water filtration system model is listed as compatible. Double-check that you have not received an incorrect filter model.
Pros and Cons
Pros
- Significantly improves water taste and odor.
- Long filter lifespan with a 1057-gallon capacity.
- Reduces common waterborne contaminants.
- Helps prevent limescale buildup.
- Certified for safety and quality by WRAS.
- Environmentally responsible alternative to bottled water.
Cons
- Specific Lincat models are incompatible.
- Requires periodic replacement (every 6 months or 4,000 liters).
- Flow rate is moderate at 1.9 liters per minute.
- Requires specific operating pressure and temperature ranges.
- May not remove all types of contaminants.
Setup, Compatibility & Care
Setup:
- Identify the correct filter housing within your water filtration system.
- Turn off the water supply to the system.
- Carefully remove the old filter, following the manufacturer's instructions for your specific system.
- Insert the new EcoAqua EWF-8002A filter, ensuring it is properly seated.
- Turn the water supply back on and check for any leaks.
- Flush the system by running water through it for approximately 5 minutes to remove any loose particles.
Compatibility:
This filter is compatible with various Lincat, 3M, and Burco models as listed in the performance section. Crucially, it is incompatible with specific Lincat models: EB3FX/HC, EB3FX/PB, EB3FX, EB4FX, EB6FX, EB6TFX, EB3FX/TT. Always double-check your system's requirements before purchasing.
Care & Maintenance:
- Replace the filter every 6 months or after filtering 4,000 liters of water, whichever comes first, to maintain optimal performance and water quality.
- Do not use the filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after use.
- Ensure the filter operates within the specified temperature and pressure ranges.