Kent & Stowe Long Handled Corkscrew Weeder - Stainless Steel

It is most effective for weeds with deep taproots, such as dandelions, docks, and thistles. The corkscrew design helps to grip and extract the entire root.

The long handle allows you to operate the weeder while standing upright, significantly reducing the need to bend or kneel. This helps to prevent back and knee strain, making gardening more comfortable.

It is recommended to apply boiled linseed oil to the wooden handle periodically, especially if it starts to look dry or feels rough. Frequency depends on your climate and storage conditions, but once or twice a year is often sufficient.

Yes, using the weeder after rain or watering can make it easier to penetrate the soil and extract weeds. However, avoid leaving the tool in waterlogged conditions for extended periods.

After each use, remove soil and debris from the metal parts with a stiff brush or damp cloth. Ensure the tool is dried thoroughly before storing to prevent rust and prolong its life.

While stainless steel is resistant to rust, prolonged exposure to moisture or corrosive substances can still cause it. Proper cleaning and drying after each use, along with dry storage, will prevent rust.

FSC certification ensures that the wood used for the handle comes from forests managed responsibly, considering environmental, social, and economic factors.

Ensure the corkscrew tip is fully engaged with the root. Try wiggling the tool slightly or watering the area beforehand to soften the soil.

Apply a coat of boiled linseed oil to the handle. Allow it to soak in and wipe off any excess. Repeat periodically.

Clean the affected area with a wire brush and dry thoroughly. Apply a light coating of oil to the metal parts to protect them. Ensure proper drying after each use.

Check for any debris or damage to the tip. Clean thoroughly. If the tip is significantly bent or damaged, professional repair or replacement might be considered, though this is rare with proper use.