CarPlan Trade Hi Wax Rinse 5L - CWR005

For the bucket method, add 250ml of Hi-Wax Rinse to a clean bucket of cold water after washing your car.

Yes, it is designed for general car exterior surfaces. However, avoid contact with windows where possible, and clean off any accidental contact immediately with Trade Valet Crystal Glass cleaner.

Hi-Wax Rinse provides a temporary wax-like shine and protection. It is not a replacement for a long-lasting, deep-penetrating traditional wax treatment but is ideal for quick maintenance and enhancing gloss between full waxing.

The best method is to use a clean, absorbent chamois or a high-quality microfibre drying towel to remove all remaining wet spots immediately after application.

Absolutely. It is designed to be effective with a traditional bucket and water method or with a trigger spray applicator.

You can use Hi-Wax Rinse after every wash to maintain a high level of shine and protection, especially if you are looking for a quick detailing solution.

Ensure the car is thoroughly dried immediately after application with a clean chamois or microfibre cloth. Avoid application in direct sunlight or on hot surfaces where drying is too rapid.

Use Trade Valet Crystal Glass cleaner to effectively remove any Hi-Wax Rinse residue from glass surfaces. Reapply to the car body if necessary.

Verify the correct dilution ratio is being used. Ensure the product is applied evenly and the car surface is clean prior to application. A second application might be beneficial for very dull surfaces.

Ensure you are using sufficient water for rinsing. For bucket application, ensure the concentration is correct. For jet wash, check the machine's rinse cycle and water flow.