Best current price£6.44from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£6.44Visit shop Plumbright Compression Swivel Bent Tap Connector 22Mm X 3/4" P803sf.3
Visit shop
B&Q£11.53Visit shop B&Q - Compression Swivel Bent Tap Connector 22mm X 3/4" P803Sf.3
Visit shop2 offers from £6.44 - £11.53
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts looking to quickly and efficiently connect taps using the Plumbright Compression Swivel Bent Tap Connector. The key benefit of this connector is its compression swivel design, which allows for fast and secure installations. A potential caveat is ensuring proper tightening to prevent leaks.
| Model Part Number | P803SF.3 |
|---|---|
| Brand | Plumbright |
You will need a pipe cutter, a wrench to tighten the compression nut, and possibly a deburring tool to clean the pipe ends.
Tighten the nut until it feels secure, then give it a slight additional turn. Avoid overtightening, as this can damage the fitting.
It is generally recommended to use a new olive each time you assemble a compression fitting to ensure a watertight seal.
This connector is typically compatible with copper pipes. Always ensure that the pipe material is suitable for compression fittings.
Make sure the pipe end is clean and properly inserted. Try replacing the olive and tightening the nut again. If problems persist, consider using pipe joint compound.
Loosen the compression nut with a wrench. You may need to gently wiggle the fitting to detach it from the pipe.
Tighten the compression nut further, but do not overtighten. If the leak persists, disassemble the connection, inspect the olive for damage, and reassemble with a new olive.
Ensure that the pipe is properly inserted into the connector and that the threads are clean. Apply a small amount of pipe joint compound to the threads if needed.
Tighten the nut further, but do not overtighten.
