If it says T-Cut…it works! T-Cut Clay Bar Kit creates a smooth as glass, mirror-like finish on all...If it says T-Cut…it works! T-Cut Clay Bar Kit creates a smooth as glass, mirror-like finish on all paintwork, fibreglass and metal surfaces and increases the depth of shine when waxing or polishing. Every minute of every day, vehicle paintwork is under attack from harmful surface contaminants such as road grime, tree sap, surface oxidation, bug residue, industrial pollution and other paint contaminants. Washing removes the soft contaminants but does little to reduce the impact of stubborn, embedded contamination. By waxing over these contaminants, they are simply sealed in where they continue to do harm. This kit contains a special blend of the lubricants and materials needed to remove surface contamination from paint and leaves your vehicle’s finish clean and super smooth. Claying is car cleanings best kept secret and it makes a really big difference to how your cars paintwork looks and feels. It is recommended to use the clay bar twice a year to remove the harder contaminants that get stuck in the paintwork and to maintain that perfect finish. Kit Contents: Clay Bar 100g The clay bar is a non-abrasive, synthetic polymer which acts like a magnet to collect all the small contaminants on a vehicle’s paintwork which aren’t visible to the naked eye. The bar contains enough clay to treat a mid-sized vehicle 2-3 times, depending on how dirty the paint is. For best results use half of the clay bar at a time. T-Cut Clay Liquid 500ml A thin film of T-Cut Clay Liquid provides a safety barrier that enables the clay to aquaplane across the surface of your paintwork, lifting contaminants with ease. Without sufficient clay liquid being applied, the clay will rub and judder across the paint surface, hindering the performance of the clay bar.
T-Cut Clay Bar KitFree delivery in 1–3 days£19.99Visit shop →
Product Information
Full details
The T-Cut Clay Bar Kit is designed for car enthusiasts seeking a smooth, glass-like finish on their vehicle's paintwork. By effectively removing embedded contaminants, it prepares surfaces for waxing and polishing, enhancing shine and protection. Note that regular washing removes soft contaminants, but this kit tackles the stubborn ones that remain.
All features
Brand
T-Cut
Extended Product Information
FAQs
How often should I use the T-Cut Clay Bar Kit?
It is recommended to use the clay bar twice a year to remove the harder contaminants that get stuck in the paintwork.
Can I use the clay bar on glass?
No, the clay bar is designed for use on paintwork, fibreglass, and metal surfaces only. Do not use on glass.
What if I drop the clay bar?
If the clay bar is dropped, inspect it carefully. If it has picked up any dirt or debris, discard it and use a fresh piece to avoid scratching your paint.
Do I need to wax after using the clay bar?
Yes, it is highly recommended to wax or polish your vehicle after using the clay bar to protect the newly cleaned surface and enhance the shine.
How much of the clay bar should I use at once?
For best results use half of the clay bar at a time.
What is the shelf life of the T-Cut Clay Liquid?
The shelf life of the T-Cut Clay Liquid is typically 2-3 years if stored properly in a cool, dry place.
Troubleshooting
Clay bar feels sticky or difficult to move.
Apply more T-Cut Clay Liquid to the surface. Ensure the surface is well lubricated.
Clay bar is leaving streaks or marks.
Fold the clay bar to expose a clean surface and reapply the T-Cut Clay Liquid.
Pros and Cons
Pros
Effectively removes stubborn contaminants that washing alone cannot.
Prepares the surface for optimal wax and polish application, enhancing their effectiveness.
Significantly improves the look and feel of your car's paintwork.
Easy to use with clear instructions.
Kit contains everything needed for the process.
Cons
Requires some time and effort to use correctly.
May require reapplication every 6 months depending on environment and use.
Doesn't remove scratches or imperfections; it prepares the surface.
Setup, Compatibility & Care
Preparation: Wash and dry your vehicle thoroughly. Ensure the surface is free of loose dirt and debris.
Clay Application: Break off a portion of the clay bar and flatten it into a patty. Generously apply T-Cut Clay Liquid to a small section of the paint.
Claying: Gently rub the clay bar over the lubricated surface using a back-and-forth motion. The clay should glide smoothly.
Wipe & Inspect: Wipe off the area with a clean microfiber cloth. Inspect the surface; it should feel smooth.
Repeat: Repeat steps 2-4, working in small sections until the entire vehicle is treated.
Compatibility: Suitable for use on all paintwork, fibreglass, and metal surfaces.
Care: Store the clay bar in a clean container after use. Discard the clay bar if it becomes heavily contaminated. Use the clay liquid as directed to avoid damage to the paintwork.