Designer Straight Towel Radiator - Silver

No, radiator valves are not included with this product. You will need to purchase them separately.

This radiator is designed exclusively for central heating systems. It cannot be used with electric elements or as a standalone electric heater.

Clean the radiator with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Always dry the surface thoroughly with a clean cloth afterwards to maintain the shine.

The pipe centers are 355mm. The distance from the wall to the pipe centers can be adjusted between 75-95mm.

The heat output is 174 Watts, which is equivalent to 592 BTU/h.

Yes, its design and heat output make it suitable for drying towels and heating bathrooms when connected to a central heating system.

This radiator is manufactured in the European Union (EU).

Ensure the central heating is on and the thermostat is set appropriately. Check that the radiator valves are fully open. Bleed the radiator if there is trapped air (listen for hissing and close valve when water appears). Verify the system pressure is adequate.

Turn off the heating system and isolate the radiator. Tighten the valve connections gently. If leaking persists, check the sealing washers and re-seal if necessary. Consult a plumber if unsure.

This can indicate air trapped in the system. Bleed the radiator (see first issue). If the bottom is cold and the top is hot, it usually means air is trapped. If the bottom is hot and the top is cold, it might indicate a blockage or a flow issue.

Clean gently with a soft, damp cloth and a mild, non-abrasive cleaner. Ensure the surface is thoroughly dried afterwards. Avoid harsh chemicals.