Best current price£8.46from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.46Visit shop B&Q - Instrument Cable Xlr 3 Pin Plug To 6.35mm Male Mono Jack Plug Cable 5M
Visit shop1 offer from £8.46
View price history by clicking the chart icon.
This 5-meter Kenable instrument cable is designed for musicians and audio engineers needing to connect mono 6.35mm output devices to XLR inputs. Its primary benefit is providing a reliable connection for instruments like keyboards or guitars to mixing desks or stage boxes during live performances or studio recording. A minor consideration is its mono-only capability, making it unsuitable for stereo signals.
| Model Part Number | 007621 |
|---|---|
| Brand | kenable |
You can connect mono 6.35mm (1/4 inch) output devices, such as certain instruments or audio processors, to XLR mono input sockets found on mixing desks, amplifiers, or audio interfaces.
No, this cable is designed for mono (single channel) signals only due to the 6.35mm mono jack plug and the single-channel nature of the XLR connection it's intended for.
The cable is 5 meters (approximately 16.4 feet) long.
The connectors are nickel-plated, which provides good durability and conductivity.
This cable is designed for instruments with a 6.35mm output. While it has an XLR connector, it is not a standard microphone cable, which typically has XLR on both ends and is designed for microphone-level signals.
It refers to the cable's internal construction: two insulated conductors for the audio signal, surrounded by a braided shield to protect against electrical interference, all within a flexible outer jacket.
Check that both ends of the cable are securely plugged in. Ensure the correct input and output ports are being used. Test the cable with different equipment if possible to isolate the issue. Inspect connectors for dirt or damage.
Ensure the cable is fully seated in both the input and output jacks. Verify that the receiving device's ground lift switch (if applicable) is set correctly. Try a different cable to see if the noise persists.
Gently wiggle the connector while inserting or removing. Do not force it, as this can damage the port or the connector. Ensure there is no debris in the port or on the connector pins.
Setup:
Compatibility:
Care:
