Primed White Pine Angled Edge Moulding - L2400mm W27mm T27mm

You will need a measuring tape, saw (mitre saw recommended), construction adhesive or nails, a hammer or nail gun, wood filler, sandpaper, and paint.

While the moulding is made of pine, it is recommended for indoor use. Outdoor applications may require additional weatherproofing treatments.

Use a mitre saw to cut the moulding at the required angles. Ensure you measure the angles accurately.

Construction adhesive specifically designed for wood is recommended. You can also use nails to secure the moulding.

Use wood filler to fill the nail holes. Let it dry, then sand the area smooth before painting.

Yes, you can stain this moulding, but you will need to sand off the primer first.

Store the moulding in a dry, flat place to prevent warping or damage.

Double-check measurements and recut the moulding if necessary. Ensure the surfaces are level.

Ensure the surface is properly primed and cleaned before painting. Lightly sand the surface for better adhesion.

Use caulk to fill gaps between the moulding and the wall or other surfaces.