Best current price£254.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£254.00Visit shop Könner & Söhnen Automatic Transfer Switch (Ats) Ks Ats 4/25 Gasoline For 230 V And 400 V Consumers
Visit shop1 offer from £254.00
View price history by clicking the chart icon.
The Könner & Söhnen KS ATS 4/25 is an essential utility for homeowners and small businesses using gasoline inverter generators who require seamless, hands-off backup power during grid outages. By automating the startup and shutdown sequence of your generator, it ensures your critical appliances remain powered without manual intervention, though it requires a generator specifically equipped with an 8-pin ATS input port for full functionality.
| Model Part Number | KS ATS 4/25 |
|---|---|
| Brand | Könner & Söhnen |
No, it is specifically designed for Könner & Söhnen inverter generators equipped with an 8-pin ATS control port.
Yes, the KS ATS 4/25 is designed to be versatile for use in both 230V and 400V network configurations.
The PLC allows you to customize operational parameters like engine warm-up time and delay periods before transferring the load.
The unit is designed for indoor use within a temperature range of -10 to 55 °C; it should be protected from direct rain and excessive humidity.
Simply switch the ATS to 'Manual' mode to prevent the system from automatically starting the generator while you are working on it.
The unit comes with a 5-meter control cable, allowing for flexible positioning between your generator and the switch unit.
Check the 8-pin connection cable for a secure fit and verify that the generator's internal start battery is charged.
Ensure the device is set to 'Auto' mode and check that the generator is producing the correct voltage output.
Check if the emergency stop button was accidentally pressed or if there is a fault signal indicated on the PLC display.
Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. 1. Mount the steel enclosure to a flat wall surface using the mounting holes. 2. Connect the ATS input to your generator using the provided 8-pin control cable. 3. Wire the mains input and generator load output to the respective terminals inside the unit. 4. Verify connections and toggle the switch to 'Auto'. To maintain the unit, keep the surrounding area free of dust and moisture, as the system is rated for 0-60% relative humidity. Regularly inspect the 8-pin cable for signs of wear and ensure the emergency stop button remains unobstructed.
