Max Meyer Plastiprimer - Beige - 1000ml
Best current price£40.19from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£40.19Visit shop Max Meyer 1.823.1500/E1 1K 1 Litre Plastiprimer Can - Use on Bare Plastics
Visit shopeBay£40.19Visit shop All Offers
2 offers from £40.19 - £44.26
View price history by clicking the chart icon.
eBayMax Meyer 1.823.1500/E1 1K 1 Litre Plastiprimer Can - Use on Bare Plastics
Free delivery in 1–3 days
£40.19
Visit shop
OnBuy.comMax Meyer 1.823.1500/E1 1K 1 Litre Plastiprimer Can - Use On Bare Plastics 3871170027398
Free delivery in 1–3 days
£44.26
Visit shop
Product Information
Full details
The Max Meyer Plastiprimer is a high-performance 1K primer specifically engineered for automotive technicians and DIY enthusiasts looking to repair bare plastic components. Its primary benefit is providing superior adhesion on difficult plastic surfaces, creating a reliable foundation for paint; however, users should note that it is designed primarily for spot repairs rather than full-panel immersion coating.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 1.823.1500/E1 |
| Brand | Max Meyer |
| Container Volume | 1000ml |
Extended Product Information
FAQs
Does this primer require mixing with a hardener?
No, this is a 1K (single-component) product and is ready to use directly from the container.
Can I use this on metal surfaces?
This product is specifically formulated for bare plastics. For metal surfaces, please use a dedicated metal primer.
What is the primary color of the primer?
The Max Meyer Plastiprimer is beige.
How should I store the container?
Keep it tightly sealed in a cool, dry place away from heat and direct sunlight.
Is this suitable for full-body repaints?
It is designed for spot priming and small repair areas, not for full-body coverage.
Do I need to sand the primer after it dries?
Yes, light sanding is typically recommended to ensure a perfectly smooth surface before applying your topcoat.
Troubleshooting
Poor adhesion to the plastic surface
Ensure the plastic surface was thoroughly cleaned and de-greased before application; check for residue from mold release agents.
Finish appears uneven or grainy
Ensure the application equipment is clean and calibrated for the correct pressure to prevent atomization issues.
Slow drying time
Verify that the ambient temperature is not below 15°C and that humidity levels are within the recommended range for automotive paint products.
Pros and Cons
Pros
- Excellent adhesion properties on plastic
- Time-saving single-component (1K) application
- Fast drying for efficient project completion
- Consistent and smooth finish
- Professional grade quality
Cons
- Primarily limited to spot repair use
- Not intended for non-plastic surfaces
- Requires proper ventilation for application
Setup, Compatibility & Care
To ensure optimal results, the substrate must be thoroughly cleaned with a degreaser to remove all silicone, wax, and mold release agents before application. While the product is 'ready to use,' ensure the ambient temperature in your workspace is between 15°C and 25°C for the best flow and drying time. Keep the container tightly sealed when not in use to prevent solvent evaporation. Store in a cool, dry area away from direct sunlight and ignition sources. Always wear appropriate personal protective equipment (PPE), including a respirator and gloves, as with all automotive chemical coatings.